Apprenticeship Training

To be an apprentice a candidate must find an employer who is able to take them on as an apprentice and then make sure to register with their local apprenticeship or trades authority. Apprenticeship combines paid, work-based training (roughly 80 percent) with technical training in a classroom or shop (roughly 20 percent). The trades known nationally as autobody and collision technician, automotive refinishing technician and automotive service technician are all Red Seal trades.

The Red Seal program allows qualified trades persons to practice in any province or territory in Canada where the trade is designated. Funding, programs and federal tax incentives are all available for employers so they can hire and train apprentices. Information about occupational standards and financial support for apprentices and businesses is available at red-seal.ca and canada.ca/en/employment-social-development/services/apprentices.html. This section lists organizations across Canada that offer apprenticeship training for auto body technician, automotive refinishing and automotive service trades.

Training ProviderCourse NameDescriptionCategoryProvince/State
WEDGE CLAMP SYSTEMS INC.N/A – WEDGE CLAMP SYSTEMS INC.Wedge Clamp, under the direction of Vice-President Mark Greenberg, is committed to ensuring training on Wedge Clamp equipment, such as its chainless anchoring systems and Eclipse electronic measuring system, is provided to distributors and customer techniMeasuring; pulling; and paintingn/a
VANCOUVER ISLAND UNIVERSITYAutomotive Service Technician Foundation – VANCOUVER ISLAND UNIVERSITYFor its Automotive Service Technician Foundation program, Vancouver Island University offers daily lectures, seminars and demonstrations of current servicing techniques, as well as extensive practical training in a functioning automotive bodyshop setting.Core TrainingBritish Columbia
VANCOUVER COMMUNITY COLLEGEAutomotive Service Technician Harmonized Foundation Certificate – VANCOUVER COMMUNITY COLLEGEGraduates from this Vancouver Community College program will have acquired the basic knowledge, skills and attitude necessary to carry out the duties of an automotive service technician. Upon successful completion of the course, students will receive an ACore TrainingBritish Columbia
VANCOUVER COMMUNITY COLLEGEAutomotive Refinishing Prep Technician – VANCOUVER COMMUNITY COLLEGEAn automotive refinishing prep technician typically removes parts, masks, performs chemical cleaning, applies putty, sands, primes and prepares an automobile, truck or bus. Graduates will receive credit toward completion of the Automotive Refinishing PreCore TrainingBritish Columbia
VANCOUVER COMMUNITY COLLEGEAutomotive Collision Repair Technician – VANCOUVER COMMUNITY COLLEGEThis Vancouver Community College program offers training in a wide range of skills appropriate to today’s advanced elements of the automobile collision repair industry. Training within the program is done with modern equipment and the latest techniques anCore TrainingBritish Columbia
VANCOUVER COMMUNITY COLLEGEAutomotive Service Technician Apprentice – VANCOUVER COMMUNITY COLLEGETraining for this program is divided into four levels, where students will learn the latest in automotive diagnostics and repair including engines, fuel systems, tires, brakes, electronics, and transmissions.ApprenticeshipBritish Columbia
VANCOUVER COMMUNITY COLLEGEAutomotive Refinishing Prep Technician Apprentice – VANCOUVER COMMUNITY COLLEGEThere is one level of technical training for an auto refinishing preparation apprentice. Students train in classrooms and autobody labs in Vancouver Community College facility at the college’s Broadway campus. Students will learn the latest skills in autoApprenticeshipBritish Columbia
VANCOUVER COMMUNITY COLLEGEAutomotive Paint and Refinishing Technician Apprentice – VANCOUVER COMMUNITY COLLEGEAdd the finishing touch to your apprenticeship through this Vancouver Community College program. Learn the latest techniques in automotive paint and refinishing. This technical training program is designed for the apprentice currently working in the automApprenticeshipBritish Columbia
VANCOUVER COMMUNITY COLLEGEAutomotive Glass Technician Apprentice – VANCOUVER COMMUNITY COLLEGEThis program is catered to an automotive glass installation apprentice currently working in the automotive collision repair industry or someone looking to return to the trade with an increased, comprehensive skill set.ApprenticeshipBritish Columbia
VANCOUVER COMMUNITY COLLEGEAutomotive Collision Repair Technician Apprentice – VANCOUVER COMMUNITY COLLEGELevel 1 of this program covers shop safety, tools and the fundamentals of autobody construction and repairs. Level 2 advances apprentice skills in repairing a wide variety of autobody surfaces, while Level 3 completes the training with structural repairsApprenticeshipBritish Columbia
VALE TRAINING SOLUTIONSElectric & Hybrid Vehicles Estimatics – VALE TRAINING SOLUTIONSThe course is designed for the student that is well-versed in writing estimates and wants an edge and insight into the quickly emerging Hybrid and Electric vehicle market that is approaching worldwide. Learn to generate damage estimates on Hybrid and ElecEstimatingOntario
VALE TRAINING SOLUTIONSAuto Estimatics® – VALE TRAINING SOLUTIONSAttain the skills and knowledge to prepare a complete and accurate electronic estimate using automated system data as well as practical repair formulas and structural analysis methods.EstimatingOntario
VALE TRAINING SOLUTIONSAuto Examiner – VALE TRAINING SOLUTIONSStudents in this program perform practice estimates on each section of the vehicle (front, side, and rear impacts on outer body components). Learn to perform damage estimates on outer body panels of cars, light trucks, vans and SUVs, and recognize signs oEstimatingOntario
URGN/A – URGURG is dedicated to helping Members keep up with the latest trends, training and tools. URG provides easy access to recyclers through online resources including tutorials, webinars, and videos that will keep you up to date. In addition, URG offers its annRecycling Trainingn/a
UNIVERSITY OF THE FRASER VALLEYAutomotive Service Technician Apprenticeship – UNIVERSITY OF THE FRASER VALLEYClasses include both theory and practice, and this program follows the approved British Columbia Automotive Service Technician Program Outline, which meets the requirements for Canadian Red Seal accreditation.ApprenticeshipBritish Columbia
UNIVERSITY OF THE FRASER VALLEYAutomotive Collision Repair and Refinish – UNIVERSITY OF THE FRASER VALLEYThe program provides opportunity to work on project vehicles. Students will spend time building skills with leading-edge technology. Acquire the technical skills necessary to perform in any shop while also developing design flair for working on custom vehCore TrainingBritish Columbia
UNIVERSITY OF THE FRASER VALLEYAutomotive Service Technician – UNIVERSITY OF THE FRASER VALLEYStudents will get a systematic introduction to the trade and thorough hands-on opportunities to develop the skills expected by today’s employers and prepare you for an apprenticeship program. Sample topics include: Using specialized equipment; Servicing bCore TrainingBritish Columbia
UNIVERSITY COLLEGE OF THE NORTH, THE PAS CAMPUSAutomotive Technician – UNIVERSITY COLLEGE OF THE NORTH, THE PAS CAMPUSDevelop an understanding of the basic purpose, construction, operation and service of component parts and assemblies of an automobile. Students will develop the knowledge and skills required to disassemble, inspect, machine, calibrate, and reassemble motoCore TrainingManitoba
Tropicana Employment CentreAuto body & Collision damage Repairer Branch 1, Trade Code 310B Pre-apprenticeship (Level 1) – Tropicana Employment CentreThis program is a tuition free program funded by the Government of Ontario designed as a stepping stone to finding an apprenticeship. Program Length: 30 weeks (April–November). Students receive 7-weeks of Academic Upgrading in Math and English by the ToroCore TrainingOntario
Titanium Tools and EquipmentTitanium Tools and Equipment – Titanium Tools and EquipmentTitanium Tools and Equipment provides industry professional virtual and in person product training to distributors and technicians at its warehouse, showroom and training centre located in Maple, Ontario. Training is offered on Celette equipment such as tStructural RepairOntario
Tinbasher Inc.Aluminum MIG Welding and Repair Program of Non-Structural panels – Tinbasher Inc.This a Hands on Program to learn the techniques to Weld and Repair Today’s Aluminums. This is a In-Shop, two-day repair program including four Hours of repair and aluminum theory and 12 hours of hands on repair. Presented by John Poole, Former InstructorAluminumOntario
THOMPSON RIVERS UNIVERSITYAutomotive Service Technician Foundation – THOMPSON RIVERS UNIVERSITYStudents receive first-year credit for apprenticeship technical training after completing the program. Course covers automotive fundamentals, engines, basic test equipment, electrical systems, running gear, clutches, transmissions, rear axles, steeringCore TrainingBritish Columbia
THOMPSON RIVERS UNIVERSITYAutomotive Service Technician Apprenticeship – THOMPSON RIVERS UNIVERSITYThe classroom program includes courses in electrical systems air conditioning systems, fuel systems, driveline, engine mechanical, powertrain, steering and suspension, brakes, options and accessories, computer operated/assisted systems, truck componApprenticeshipBritish Columbia
ST. LAWRENCE COLLEGEWelding & Fabrication Technician – ST. LAWRENCE COLLEGEThe program delivers welding technology at the technician level and prepares students for the demands of the welding industry. Graduates of this two-year program are eligible to receive an Ontario college diploma. Students also receive the equivalent of aWeldingOntario
ST. LAWRENCE COLLEGEAutomotive Service Technician – ST. LAWRENCE COLLEGEThe School of Skilled Trades at the Cornwall campus offers the in-school study portion of the apprenticeship. Areas of study include engines, fuel and electrical systems, powertrains, steering, suspension and brakes, and applied shop practice, incApprenticeshipOntario
ST. CLAIR COLLEGEWelding Techniques – ST. CLAIR COLLEGEThe goal of the St. Clair College welding program is to provide graduates with comprehensive theoretical knowledge and extensive practical hands-on skills to find employment in small and large organizations.WeldingOntario
SprayMaxSmall Damage Repair – SprayMaxPeter Kwasny GmbH is a leader in the development of high quality, cost-efficient small damage repair systems. SprayMax has pioneered new products and techniques to deliver 1K and 2K: surface prep, primer, paint and clear coat solutions to accelerate shopPaint & Refinishing
Spanesi Americas Inc.Spanesi Welding and Joining Training – 2 Day Course December 2020 – Spanesi Americas Inc.Learn how to properly setup and use Spanesi’s MIG/MAG welding machines and Spanesi Squeeze-Type Resistance Spot Welding machines. Get tips, tricks and instruction on the proper joining methods used on multiple substrates. This 2-day class provides the oppWeldingIL
Spanesi Americas Inc.Spanesi Touch Training – 2 Day Course December 2020 – Spanesi Americas Inc.Learn to measure vehicles using the Touch electronic measuring system. This course provides instruction on all of the functions provided by the most flexible 3D vehicle measuring system in the world. This 2-day class provides the opportunity to learn fromMeasuring; Pulling; and PaintingIL
Spanesi Americas Inc.Spanesi Universal Jig Training – 2 Day Course November 2020 – Spanesi Americas Inc.Learn how to use one of the most flexible Universal Jig systems in the world. This two-day class provides the opportunity to learn from the best with the individuals that install Spanesi Frame Straightening Benches and Universal Jig Systems across North AStructural RepairIL
Spanesi Americas Inc.Spanesi Touch Training – 2 Day Course November 2020 – Spanesi Americas Inc.Learn to measure vehicles using the Touch electronic measuring system. This course provides instruction on all of the functions provided by the most flexible 3D vehicle measuring system in the world. This 2-day class provides the opportunity to learn fromMeasuring; Pulling; and PaintingIL
Spanesi Americas Inc.Spanesi Touch Training – 2 Day Course October 2020 – Spanesi Americas Inc.Learn to measure vehicles using the Touch electronic measuring system. This course provides instruction on all of the functions provided by the most flexible 3D vehicle measuring system in the world. This 2-day class provides the opportunity to learn fromMeasuring; Pulling; and PaintingIL
Spanesi Americas Inc.Spanesi Welding and Joining Training – 2 Day Course September 2020 – Spanesi Americas Inc.Learn how to properly setup and use Spanesi’s MIG/MAG welding machines and Spanesi Squeeze-Type Resistance Spot Welding machines. Get tips, tricks and instruction on the proper joining methods used on multiple substrates. This 2-day class provides the oppWeldingIL
Spanesi Americas Inc.Spanesi Touch Training – 2 Day Course September 2020 – Spanesi Americas Inc.Learn to measure vehicles using the Touch electronic measuring system. This course provides instruction on all of the functions provided by the most flexible 3D vehicle measuring system in the world. This 2-day class provides the opportunity to learn fromMeasuring; Pulling; and PaintingIL
Spanesi Americas Inc.Spanesi Universal Jig Training – 2 Day Course August 2020 – Spanesi Americas Inc.Learn how to use the most flexible Universal Jig system in the world. This 2-day class provides the opportunity to learn from the best with the individuals that install Spanesi Frame Straightening Benches and Universal Jig Systems across North America. ThStructural RepairIL
Spanesi Americas Inc.Spanesi Touch Training – 2 Day Course August 2020 – Spanesi Americas Inc.Learn to measure vehicles using the Touch electronic measuring system. This course provides instruction on all of the functions provided by the most flexible 3D vehicle measuring system in the world. This 2-day class provides the opportunity to learn fromMeasuring; Pulling; and PaintingIL
SOUTHERN ALBERTA INSTITUTE OF TECHNOLOGYPre-Employment Automotive Service Technician – SOUTHERN ALBERTA INSTITUTE OF TECHNOLOGYAcquire the skills to perform preventative maintenance, basic diagnosis and repairs on cars and light-duty trucks. Students will learn about the systems in today‚ vehicles utilizing state-of-the-art tools and equipment. Hands-on practice includes: safetyCore TrainingAlberta
SOUTHERN ALBERTA INSTITUTE OF TECHNOLOGYAutomotive Service Technician Apprentice – SOUTHERN ALBERTA INSTITUTE OF TECHNOLOGYAs a trained automotive service technician, students will adjust, test and repair engines, steering systems, braking systems, drive trains, vehicle suspensions, electrical systems and air-conditioning systems as well as complete wheel alignments.ApprenticeshipAlberta
SOUTHERN ALBERTA INSTITUTE OF TECHNOLOGYAutomotive Service Technology – SOUTHERN ALBERTA INSTITUTE OF TECHNOLOGYProgram provides preparation for an apprenticeship as an automotive service technician. This is a two-year diploma. Automotive courses are provided in a combination of classroom, lab and shop environments. Students will utilize up- to-date equipment, carrCore TrainingAlberta
SOUTHERN ALBERTA INSTITUTE OF TECHNOLOGYAuto Body Technician Apprentice – SOUTHERN ALBERTA INSTITUTE OF TECHNOLOGYThis program will train you to repair and/or replace damaged motor vehicle structures and body components, prepare for refinishing and apply interior and exterior finishes. You may specialize in prepping, refinishing, sheet metal and plastics repair, or fApprenticeshipAlberta
SOUTHERN ALBERTA INSTITUTE OF TECHNOLOGYAuto Body Preparation – Certificate – SOUTHERN ALBERTA INSTITUTE OF TECHNOLOGYThis program provides an alternative entry into the autobody industry. Acquire the skills to prepare a vehicle for autobody repair by removing paint finish, taping, sanding and masking. Hands-on practice includes: substrate preparation; application of filCore TrainingAlberta
SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Write a Basic Estimate in Qapter Estimating – SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)This series of training videos are recommended for Audatex Estimating users migrating to Qapter Estimating, who would like to learn how to write a basic estimate. Offered complimentary to Audatex customers.Management & EstimatingOntario
SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Working with Comments in Qapter Estimating – SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Learn how to work with the comments feature in Qapter Estimating. Offered complimentary to Audatex customers.Management & EstimatingOntario
SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Setup and Use APU Solutions in Qapter Estimating – SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Learn how to setup and use APU Solutions in Qapter Estimating. Offered complimentary to Audatex customers.Management & EstimatingOntario
SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Rates and Taxes in Qapter Estimating Video – SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Learn how to setup Rates and Taxes in the Setup page and Select and Update records within the Estimate in Qapter Estimating. Offered complimentary to Audatex customers.Management & EstimatingOntario
SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Qapter Estimating eLearning Series – SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)When you have completed this curriculum, you will be able to write an estimate using Qapter Estimating software. Offered complimentary to Audatex customers.Management & EstimatingOntario
SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Print and Email in Qapter Estimating – SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Learn how to print or email in Qapter Estimating. Offered complimentary to Audatex customers.Management & EstimatingOntario
SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Preferences Setup in Qapter Estimating – SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Learn how to setup Estimating and Autosource settings, estimator, repairer or appraiser settings, setup prestored report and damage remarks, manual entries , paintless dent repair, thresholds, alternate parts, disclaimers, customer database, mandatory fieManagement & EstimatingOntario
SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Paintless Dent Repair – SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Learn how to use the Paintless Dent Repair feature in Qapter Estimating. Offered complimentary to Audatex customers.Management & EstimatingOntario
SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)How to Merge Assignments in Qapter Estimating – SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Learn how to Merge Assignments in Qapter Estimating. Offered complimentary to Audatex customers.Management & EstimatingOntario
SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Hide and Find Work Items in Qapter Estimating – SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Learn how to Hide and Find Work Items in Qapter Estimating. Offered complimentary to Audatex customers.Management & EstimatingOntario
SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Estimate Check in Qapter Estimating Video – SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Learn how to use Estimate Check in Qapter Estimating. Offered complimentary to Audatex customers.Management & EstimatingOntario
SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Create a Supplement in Qapter Estimating Video – SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Learn how to create a supplement on a completed estimate in Qapter Estimating. Offered complimentary to Audatex customers.Management & EstimatingOntario
SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Autosource Updates Video – SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Learn how to update an Autosource Valuation in Qapter Estimating. Offered complimentary to Audatex customers.Management & EstimatingOntario
SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Add Tires in Qapter Estimating Video – SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Learn how to add tires to an estimate in Qapter Estimating. Offered complimentary to Audatex customers.Management & EstimatingOntario
SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Audatex Insight Analytics – SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Learn how to create data rich reports and present results graphically using the powerful Insight Analytics tool. Offered complimentary to Audatex customers.Management & EstimatingOntario
SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Working with Comments Video – SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Learn how to work with the Comments feature in Audatex Estimating. Offered complimentary to Audatex customers.Management & EstimatingOntario
SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Work List Overview Video – SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Watch a quick video for an overview of the Audatex Estimating Work List. Offered complimentary to Audatex customers.Management & EstimatingOntario
SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Using Claims Search Viewer – SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Learn about the workflow process using Claims Search Viewer. Offered complimentary to Audatex customers.Management & EstimatingOntario
SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Upgrade Through AudaUpdate Standalone and Multi-Users – SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Watch this if you are receiving a prompt that a new version of Audatex Estimating has been downloaded and is ready to install. Offered complimentary to Audatex customers.Management & EstimatingOntario
SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Understanding Labor Operations and the Labor Database – SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Understanding Labor Operations and the Labor Database. Offered complimentary to Audatex customers.Management & EstimatingOntario
SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Top Troubleshooting Tips for your Work List – SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Learn about the top troubleshooting tips for the Work List. Offered complimentary to Audatex customers.Management & EstimatingOntario
SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Tire Database Video – SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Learn how to use the Tire Database in Audatex Estimating. Offered complimentary to Audatex customers.Management & EstimatingOntario
SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Tax and Threshold Setup Video – SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Learn how to setup tax and thresholds in Audatex Estimating. Offered complimentary to Audatex customers.Management & EstimatingOntario
SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Repair Facility Rates Video – SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Learn how to edit your repair facility information in Audatex Estimating. Offered complimentary to Audatex customers.Management & EstimatingOntario
SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Quick Damage Page Overview Video – SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Watch this video to see a quick overview of the Damage page. Offered complimentary to Audatex customers.Management & EstimatingOntario
SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Password Reset Training – SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Watch this video to see how to reset your Audatex Estimating password. Offered complimentary to Audatex customers.Management & EstimatingOntario
SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Paintless Dent Repair Video – SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Learn how to use Paintless Dent Repair in Audatex Estimating. Offered complimentary to Audatex customers.Management & EstimatingOntario
SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)How to Use Paintless Dent Repair (PDR) in an Estimate – SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Watch this video to learn how to use PDR in an Estimate. Offered complimentary to Audatex customers.Management & EstimatingOntario
SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)How to Use 3D Graphics Video – SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Learn how to use 3D graphics in Audatex Estimating. Offered complimentary to Audatex customers.Management & EstimatingOntario
SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)How to Search for Estimates Video – SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Learn how to search for estimates in Audatex Estimating. Offered complimentary to Audatex customers.Management & EstimatingOntario
SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)How to Refresh All Profiles Video – SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Watch this video to see how to refresh All Profiles in Audatex Estimating. Offered complimentary to Audatex customers.Management & EstimatingOntario
SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)How to Re-Assign a Claim Video – SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Learn how to re-assign a claim in Audatex Estimating. Offered complimentary to Audatex customers.Management & EstimatingOntario
SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)How to Print Reports Video – SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Learn how to print reports in Audatex Estimating. Offered complimentary to Audatex customers.Management & EstimatingOntario
SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)How to Merge an Assignment with an Existing Claim Video – SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Learn how to merge an assignment with an existing claim in Audatex Estimating. Offered complimentary to Audatex customers.Management & EstimatingOntario
SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)How to Export and Import Claim Data Video – SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Learn how to export and import claim data in Audatex Estimating. Offered complimentary to Audatex customers.Management & EstimatingOntario
SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)How to Create a New Estimate Video – SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Learn how to create a new estimate in Audatex Estimating. Offered complimentary to Audatex customers.Management & EstimatingOntario
SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)How to Close the Claim Video – SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Learn how to close a claim in Audatex Estimating. Offered complimentary to Audatex customers.Management & EstimatingOntario
SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)How to Back Up and Restore Profile Settings Video – SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Learn how to back up and restore profile settings in Audatex Estimating. Offered complimentary to Audatex customers.Management & EstimatingOntario
SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Frame Dimensions Video – SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Watch this video for a quick introduction to Frame Dimensions. Offered complimentary to Audatex customers.Management & EstimatingOntario
SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Enhanced Prior Damage Workflow Video – SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Learn how to complete a prior damage estimate in Audatex Estimating. Offered complimentary to Audatex customers.Management & EstimatingOntario
SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Damage Remarks Video – SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Learn how to set up and save damage remarks. Offered complimentary to Audatex customers.Management & EstimatingOntario
SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Basic Damage Entries Video – SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Learn how to enter a basic damage entry in Audatex Estimating. Offered complimentary to Audatex customers.Management & EstimatingOntario
SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Autosource Settlement Entry Video – SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Watch this video for a quick introduction to the Autosource Settlement Entry feature in Audatex Estimating. Offered complimentary to Audatex customers.Management & EstimatingOntario
SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Autosource Reinspection Video – SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Watch this video for a quick introduction to Autosource Reinspection in Audatex Estimating. Offered complimentary to Audatex customers.Management & EstimatingOntario
SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Audatex Estimating Tips for Flawless Operation – SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Audatex Estimating Tips for Flawless Operation. Offered complimentary to Audatex customers.Management & EstimatingOntario
SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Audatex Estimating Reading the Estimate Report – SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)A short webinar about reading and understanding the estimate report produced by Audatex Estimating. Offered complimentary to Audatex customers.Management & EstimatingOntario
SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Audatex Estimating QUICK START Training with Learning Checkpoint – SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Audatex Estimating QUICK START Training with Learning Checkpoint. Offered complimentary to Audatex customers.Management & EstimatingOntario
SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Audatex Estimating Optional Features – SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Audatex Estimating Optional Features. Offered complimentary to Audatex customers.Management & EstimatingOntario
SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Audatex Estimating Essentials Creating Estimates – SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Creating Estimates in Audatex Estimating Essentials. Offered complimentary to Audatex customers.Management & EstimatingOntario
SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Audatex Estimating eLearning Series for Shop Users – SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)When you have completed this curriculum, you will be able to write an estimate using Audatex Estimating software. Offered complimentary to Audatex customers.Management & EstimatingOntario
SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Audatex Estimating eLearning Series for Insurance Users – SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)When you have completed this curriculum, you will be able to write an estimate using Audatex Estimating Software. Offered complimentary to Audatex customers.Management & EstimatingOntario
SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)APU Parts Search Video – SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Learn how to search for alternative parts in Audatex Estimating. Offered complimentary to Audatex customers.Management & EstimatingOntario
SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Advanced Damage Entries Video – SOLERA CANADA (AUDATEX ONLINE TRAINING CENTRE)Learn how to make advanced damage entries in Audatex Estimating. Offered complimentary to Audatex customers.Management & EstimatingOntario
SKILLS CANADASkills Canada Collision Repair Program – SKILLS CANADAThe Skills Canada Collision Repair Program promotes careers in the Collision Repair Industry. The program provides students who compete in the competitions from across Canada with hands-on training opportunities and the chance to enhance their skills andCore SkillsOntario
SHERWIN-WILLIAMS AUTOMOTIVE FINISHESThroughput Production Management – SHERWIN-WILLIAMS AUTOMOTIVE FINISHESThe production management workshop methods learned will identify and define all related procedures to process a repair in the most cost-effective manner for the collision facility, vehicle owner and insurance provider.Managed Collision RepairOntario
SHERWIN-WILLIAMS AUTOMOTIVE FINISHESRepair Planning for Rapid Throughput – SHERWIN-WILLIAMS AUTOMOTIVE FINISHESThis course will cover the importance of a full and accurate repair plan and its role in a lean collision facility.Managed Collision RepairOntario
SHERWIN-WILLIAMS AUTOMOTIVE FINISHESParts Correctness – SHERWIN-WILLIAMS AUTOMOTIVE FINISHESThis workshop will delve deeply into the specific steps of a parts correctness strategy.Managed Collision RepairOntario
SHERWIN-WILLIAMS AUTOMOTIVE FINISHESIn-Process Quality Assurance – SHERWIN-WILLIAMS AUTOMOTIVE FINISHESAre you achieving consistent and predictable repair results every day? There is a way. Find out how in this course.Managed Collision RepairOntario
SHERWIN-WILLIAMS AUTOMOTIVE FINISHESImproving Workshop Efficiency – SHERWIN-WILLIAMS AUTOMOTIVE FINISHESThis course focuses on the theory and mechanics of lean production, helping participants to understand and implement process improvement.Managed Collision RepairOntario
SHERWIN-WILLIAMS AUTOMOTIVE FINISHESExpress Repair – SHERWIN-WILLIAMS AUTOMOTIVE FINISHESParticipants in the workshop will take a hard look into express repair strategy, and learn how to reduce repair cycle times by implementing a specific express repair process in their business.Managed Collision RepairOntario
SHERWIN-WILLIAMS AUTOMOTIVE FINISHESDamage Analysis and Blueprinting – SHERWIN-WILLIAMS AUTOMOTIVE FINISHESTake a deep dive into the mechanics of a comprehensive damage analysis, with specific steps outlined to ensure that participants learn how to conduct a thorough analysis of vehicles and transfer that data into a Blueprint/RO – prior to launching them intoManaged Collision RepairOntario
SHERWIN-WILLIAMS AUTOMOTIVE FINISHESCycle Time Reduction – SHERWIN-WILLIAMS AUTOMOTIVE FINISHESThis workshop will delve deeply into a comprehensive cycle time reduction strategy, with specific steps outlined to ensure that participants learn how to reduce repair cycle times by implementing 10 absolutes in their business.Managed Collision RepairOntario
SHERWIN-WILLIAMS AUTOMOTIVE FINISHESTactically Lean – SHERWIN-WILLIAMS AUTOMOTIVE FINISHESThis course connects the dots between high-minded lean concepts and real-world results.Managed Collision RepairOntario
SHERWIN-WILLIAMS AUTOMOTIVE FINISHES5S Method to Lean – SHERWIN-WILLIAMS AUTOMOTIVE FINISHESThis course will cover the importance of eliminating clutter inside a collision facility.Managed Collision RepairOntario
SHERWIN-WILLIAMS AUTOMOTIVE FINISHESLeading for Results – SHERWIN-WILLIAMS AUTOMOTIVE FINISHESThis program will include specific steps for participants to better manage employee performance on the production floor.Managed Collision RepairOntario
SHERWIN-WILLIAMS AUTOMOTIVE FINISHESImproving Performance with KPIs – SHERWIN-WILLIAMS AUTOMOTIVE FINISHESThis course helps collision repair shops discover ways to measure their performance with Key Performance Indicators (KPIs), and use those measurements to focus their efforts to improve their business.Managed Collision RepairOntario
SHERWIN-WILLIAMS AUTOMOTIVE FINISHESCompensation Solutions for Profit – SHERWIN-WILLIAMS AUTOMOTIVE FINISHESThis course guides attendees through compensation planning strategies.Managed Collision RepairOntario
SHERWIN-WILLIAMS AUTOMOTIVE FINISHESAchieving Service ExcEllence – SHERWIN-WILLIAMS AUTOMOTIVE FINISHESThis course provides participants with the skills, information and tools necessary to provide a memorable customer interaction process.Managed Collision RepairOntario
SHERWIN-WILLIAMS AUTOMOTIVE FINISHESThe Road to Sales Success – SHERWIN-WILLIAMS AUTOMOTIVE FINISHESThis course can improve the effectiveness of your sales technique during the estimate process. It utilizes proven sales techniques especially tailored to the collision repair industry.Managed Collision RepairOntario
SHERWIN-WILLIAMS AUTOMOTIVE FINISHESEstimating Solutions for Profit – SHERWIN-WILLIAMS AUTOMOTIVE FINISHESThe ultimate goal of the course will be to maximize your profitability by writing a more complete estimate and effectively negotiating an agreed price for the repair.Managed Collision RepairOntario
SHERIDAN COLLEGE – DAVIS CAMPUSWelding Techniques – SHERIDAN COLLEGE – DAVIS CAMPUSStudents will get in-depth hands-on education in current welding techniques — working with the most current technology — and study the theory at the same time. Learn shielded metal arc welding (SMAW), gas metal arc welding (GMAW), gas tungsten arc weldingCore TrainingOntario
SHERIDAN COLLEGE – DAVIS CAMPUSWelding and Fabrication Technician – Diploma – SHERIDAN COLLEGE – DAVIS CAMPUSIn the first year of your welding diploma, you’ll get hands-on training in shielded metal arc welding (SMAW), gas metal arc welding (GMAW), gas tungsten arc welding (GTAW) and flux-cored arc welding (FCAW). In second year, you’ll learn advanced techniquesCore TrainingOntario
SAULT COLLEGEWelding Techniques – SAULT COLLEGEIn this dynamic program, you will learn the practical, hands-on skills needed to weld various types of metals, combined with the knowledge and theory of how to best do this. You will also learn how to properly use a wide-range of top-of-the-line equipmentWeldingOntario
SAULT COLLEGEMotive Power Technician – Advanced Repair – SAULT COLLEGEDesigned to prepare students to repair a wide variety of cars, trucks and heavy equipment, as well as work with parts and service, this program will teach you how to analyze, diagnose and solve various motive power system problems by using problem-solvingCore TrainingOntario
SAULT COLLEGEMotive Power Fundamentals – Automotive Repair – SAULT COLLEGELearn how to identify basic automotive system problems. Also learn how to identify, inspect and test automotive engine components and systems. You will learn how to disassemble and assemble components to the required specifications.Core TrainingOntario
SAULT COLLEGEAutomotive Service Technician – SAULT COLLEGEThis course teaches fundamental and specific skills of the trade through the training of practical applications. Strengthening the apprentices‚ high standards of craftsmanship, problem-solving skills and personal pride in their respective trades.ApprenticeshipOntario
SATA Canada IncSATA Canada Training Centre – SATA Canada IncIn January 2020 SATA Canada received official status as a training delivery agent from the Ontario Ministry of Labour, Training and Skills Development. Beginning in 2021 SATA will offer the Automotive Painter apprenticeship program, Trade Code 41ON, throuPaint & RefinishingOntario
SASKATCHEWAN POLYTECHNICAutomotive Service Technician – SASKATCHEWAN POLYTECHNICThe Automotive Service Technician course is a one-year certificate program offered in Moose Jaw and Saskatoon. You’ll learn how to diagnose, repair, service and maintain advanced mechanical and electrical systems in today’s vehicles.Core Trainingsaskatchewan
SASKATCHEWAN POLYTECHNICAutomotive Painter – SASKATCHEWAN POLYTECHNICThis applied certificate provides a solid foundation in the knowledge and skills needed to work in automotive painting. Students will dismantle and assemble vehicles, hammer out small dings, prepare, prime and refinish vehicle panels, and repair paint defCore Trainingsaskatchewan
SASKATCHEWAN POLYTECHNICAuto Body Technician – SASKATCHEWAN POLYTECHNICYou’ll get practical training in: basic and advanced metal work; basic and advanced painting; benchwork and safe working procedures; door servicing, glass installation and electrical systems; front sheet metal and plastic material repair; industry communiCore Trainingsaskatchewan
SASKATCHEWAN INDIAN INSTITUTE OF TECHNOLOGIESAutomotive Service Technician Preparation – SASKATCHEWAN INDIAN INSTITUTE OF TECHNOLOGIESThe program includes classroom and hands on training, life skills training, career planning, and safety tickets. Students can also complete a work practicum and can earn 360 hours of trade time credit toward apprenticeship.Core Trainingsaskatchewan
SASKATCHEWAN INDIAN INSTITUTE OF TECHNOLOGIESAuto Body Repair – SASKATCHEWAN INDIAN INSTITUTE OF TECHNOLOGIESGain experience and knowledge about how to repair and replace front-end components, body components, doors and frames, and underbody components.Core Trainingsaskatchewan
RONDEXN/A – RONDEXRondex facilitates technical and management training provided by Axalta Coating Systems. A variety of courses are offered, including those designed for refinishers, technicians, collision repair shop staff, supervisors, managers and shop owners. Rondex caManagement & EstimatingN/A
RIDER TRAINING INSTITUTEMotorcycle Maintenance – RIDER TRAINING INSTITUTEThe course is eight hours in length covering basic motorcycle engine, clutch and transmission theory, multi-point technical inspections on final drives, forks and tires, basic maintenance procedures such as oil changes, brake pad replacements, and chain aMaintenanceOntario
RED RIVER COLLEGEWelding – RED RIVER COLLEGEThis program develops skills and knowledge in oxyacetylene, arc, tungsten inert gas (TIG) and metal inert gas (MIG) welding processes. You will spend the majority of class time on practical shop work, plus mathematics, science, industrial communications aWeldingManitoba
RED RIVER COLLEGECollision Repair and Refinishing – RED RIVER COLLEGEThis program develops the skills for working with minor sheet metal damage, including aluminum substrates. It also covers minor panel replacement; interior and exterior trim; moulding removal and installation; proper methods of substrate preparation and rCore TrainingManitoba
RED RIVER COLLEGEAutomotive Technician – Diploma – RED RIVER COLLEGETraining alternates between three sessions of classroom instruction and three sessions of four-week work experience placements. Classroom instruction will broaden your knowledge in the automotive electronics area and will also cover engine management, fueCore TrainingManitoba
RED RIVER COLLEGEAutomotive Technician – Certificate – RED RIVER COLLEGEStudents will develop the knowledge and skills required to disassemble, inspect, machine, calibrate and reassemble motor vehicle units and components. They will study internal combustion engines, automatic and standard transmissions, brakes, steering, eleCore TrainingManitoba
RED DEER COLLEGEWelder Apprenticeship – RED DEER COLLEGEJoin or sever metals in beams, girders, vessels, piping and other metal components used in construction and manufacturing. Utilize electric arc, MIG, TIG and gas welding (oxy acetylene).WeldingAlberta
RED DEER COLLEGEAutomotive Service Technician – RED DEER COLLEGEAutomotive service technicians perform preventative maintenance, diagnose faulty operations and repair automotive vehicles and light trucks. The term of apprenticeship is four years, including a minimum of 1,560 hours of on-the-job training, and eight weeApprenticeshipAlberta
PROGIN/A – PROGIProgi offers various types of training, according to material complexity and users needs. The company can accommodate both individual sessions and small groups for training at its Trois-Rivières, Que., headquarters. Remote training is available for indiviVariousn/a
PRO SPOT INTERNATIONAL INC. TRAINING DIVISIONVarious – PRO SPOT INTERNATIONAL INC. TRAINING DIVISIONPro Spot offers a variety of courses and seminars through webinars and in-person site visits.These courses cover a variety of fields, information on steel mig welding, mig brazing and aluminum pulse mig welding; spot welding; glue tab dent repair techniquWeldingCalifornia
Precision For CollisionCLEM-00002 – Precision For CollisionComputerized Measuring Training. Car-o-liner training. Running Oct. 7 and 8. Dates subject to change, see online for details.Management & EstimatingCalifornia
PPG CanadaPPG Training – PPG CanadaPPG has a number of online training options. As the online courses may change, check out our Training overview page for current information/availability: https://us.ppgrefinish.com/Training/Home Visit the Tech Tips page for application tips, including SOPPaint & RefinishingOntario
POLYVANCEEPR-01 Estimating Plastic Repair – POLYVANCEEstimating plastic repair is an online, self-paced course designed to educate collision damage estimators and technicians in determining the repairability of damaged plastic parts. The course is designed to educate someone with no prior knowledge of plastManagement & EstimatingAlabama
POLYVANCEPR-04, One Day Plastic Repair & Refinishing – POLYVANCEThis course is designed to prepare a student with basic body shop knowledge and skills to understand the complete process of repairing and refinishing a plastic bumper cover. The focus will be on PP-blend bumper covers, but the course will also touch on tNon-Structural RepairAlabama
POLYVANCEPR-03, Headlight Repair Course – POLYVANCEThis one-hour, video-based, e-learning course will demonstrate how to repair broken headlight tabs with the nitrogen plastic welding system.Non-Structural RepairAlabama
POLYVANCEPR-02, Plastic Repair & Refinishing – POLYVANCEThis course focuses on the hands-on skills needed to repair a bumper from start to finish. This course will cover the following topics: identify different types of plastic; explain the basic nitrogen welding process; properly operate a plastic welder; worNon-Structural RepairAlabama
POLYVANCEPR-01, Introduction to Nitrogen Plastic Welding – POLYVANCEAt the end of this course, students will be able to: identify different types of plastic; explain the basic nitrogen welding process; properly operate a plastic welder; weld a tear to the edge of a bumper; repair a torn slot tab, a torn bumper mounting flNon-Structural RepairAlabama
PARKLAND COLLEGEWelding Certificate – PARKLAND COLLEGELearn on state-of-the-art equipment at the Trades and Technology Centre. You will receive training in multiple welding processes, operating fabrication equipment, using blueprints, general shop practice and shop safety. Your Saskatchewan Polytechnic WeldiWeldingSaskatchewan
Pacific Collision Equipment Co.N/A – Pacific Collision Equipment Co.Advanced Computerized Measuring system Training. Car-o-liner training. Running Oct 8 and Dec 17. Dates subject to change, see online for details.OtherCalifornia
Pacific Collision Equipment Co.CLEM7 – Pacific Collision Equipment Co.Basic Computerized Measuring system Training. Car-o-liner training. Running Sept 15/29, Oct 7/21, Nov 10/18, and Dec 15. Dates subject to change, see online for details.OtherCalifornia
ONTARIO COLLEGE OF TRADESAutomotive Service Technician – ONTARIO COLLEGE OF TRADESLearn to perform preventative maintenance, diagnose problems and repair vehicle systems in cars and light trucks. Qualified individuals may obtain a Certificate of Qualification, which confirms its holder has the skills, knowledge and experience that meetApprenticeshipOntario
ONTARIO COLLEGE OF TRADESAutomotive Painter – ONTARIO COLLEGE OF TRADESLearn to work on the surface of motor vehicles and restore vehicle finishes, including removing exterior trim and hardware, matching colours and mixing paints, and preparing surfaces for painting.ApprenticeshipOntario
ONTARIO COLLEGE OF TRADESAuto Body Repairer – ONTARIO COLLEGE OF TRADESLearn to repair the body of motor vehicles, motor coaches, trucks or truck-trailers, including preparing vehicle for refinishing and repairing vehicle bodies and components. Qualified individuals may obtain a Certificate of Qualification, which confirmsApprenticeshipOntario
ONTARIO COLLEGE OF TRADESAuto Body and Collision Damage Repairer – ONTARIO COLLEGE OF TRADESLearn to repair and replace frame and structural components, mechanical components, interior, electrical components, plastic and composite panels and sheet metal panels. Auto Body and Collision Damage Repairer is classified as a compulsory trade, which meApprenticeshipOntario
OLDS COLLEGEWelder Apprenticeship – OLDS COLLEGEJoin or sever metals in beams, girders, vessels, piping and other metal components used in construction and manufacturing. Utilize electric arc, MIG, TIG and gas welding (oxy acetylene).WeldingAlberta
OKANAGAN COLLEGE, KELOWNA CAMPUSAutomotive Glass Technician Apprentice – OKANAGAN COLLEGE, KELOWNA CAMPUSAn automotive glass technician removes, installs, repairs and generally services all types of stationary and moveable glass in motor vehicles. Apprentices are required to attend a total of two weeks of technical training courses over this two year apprentApprenticeshipBritish Columbia
OKANAGAN COLLEGE, KELOWNA CAMPUSCollision Repair/ Refinishing Prep Technician – OKANAGAN COLLEGE, KELOWNA CAMPUSStudents will gain confidence and quality experience in the removal of parts, masking, chemical cleans, applying putty, sanding, priming and preparation of cars and trucks along with classroom and hands-on training in our well-equipped industry-style shopCore TrainingBritish Columbia
OKANAGAN COLLEGE, KELOWNA CAMPUSMotor Vehicle Body Repairer – OKANAGAN COLLEGE, KELOWNA CAMPUSA motor vehicle body repairer (automotive collision repair technician) repairs, adjusts and replaces sheet metal and allied parts of automobiles, trucks and buses.ApprenticeshipBritish Columbia
OKANAGAN COLLEGE, KELOWNA CAMPUSAutomotive Refinishing Prep Technician Apprenticeship – OKANAGAN COLLEGE, KELOWNA CAMPUSAn automotive refinishing prep technician removes parts, masks, performs chemical cleaning, applies putty, sands, primes and prepares an automobile, truck or bus for the automotive refinishing technician. Apprentices are required to attend four weeks of tApprenticeshipBritish Columbia
OKANAGAN COLLEGE, KELOWNA CAMPUSAutomotive Painter – OKANAGAN COLLEGE, KELOWNA CAMPUSAn automotive painter paints and refinishes automobiles, trucks and buses. An automotive refinishing technician is designated as an automotive painter under the interprovincial Red Seal program.ApprenticeshipBritish Columbia
NOVA SCOTIA COMMUNITY COLLEGEMotor Vehicle Body Repair – NOVA SCOTIA COMMUNITY COLLEGELearn to repair and refinish collision-damaged vehicles. In this program, you learn procedures for welding, repairing and aligning body panels. You learn how to prepare and paint surfaces and how to use electronic databases to estimate costs related to veCore TrainingNova Scotia
NOVA SCOTIA COMMUNITY COLLEGEAutomotive Service and Repair – NOVA SCOTIA COMMUNITY COLLEGELearn many aspects of mechanical motor vehicle repair – from the fundamentals of automotive shops skills to an overview of basic systems used in an automobile. Learn to service and repair mechanical and electrical systems of automobiles and light trucks aCore TrainingNova Scotia
NORTHLANDS COLLEGEAutomotive Service Technician – NORTHLANDS COLLEGELearn how to diagnose, repair, service and maintain advanced mechanical and electrical systems in vehicles, and get plenty of practical, hands-on training.Core TrainingSaskatchewan
NORTHERN LIGHTS COLLEGEWelder Apprenticeship – NORTHERN LIGHTS COLLEGEWelding ferrous and non-ferrous metals in all positions on both plate and/ or pipe using SMAW, GTAW and FCAW processes. Welders use manual or semi-automatic welding equipment for flame-cutting, brazing and air arcing.WeldingBritish Columbia
NORTHERN LIGHTS COLLEGEAutomotive Service Technician – Foundation – NORTHERN LIGHTS COLLEGEExamine, test and repair parts, components and systems on cars and light trucks, often using computerized diagnostic equipment. Reassemble and test repaired items against manufacturer standards, perform preventative maintenance, such as wheel alignments,Core TrainingBritish Columbia
NORTHERN COLLEGEWelding Engineering Technology – NORTHERN COLLEGEStudents learn to develop, qualify, and implement welding procedures; to use their knowledge of welding, metallurgy, mechanics and electrical engineering in the design and manufacturing of safe structures; and to inspect and maintain the integrity of suchWeldingOntario
NORTHERN COLLEGEAutomotive Service Technician Apprenticeship Program – NORTHERN COLLEGETraining is delivered in day release format, one day per week for 40 weeks. Three levels of theoretical in-school training includes instruction in work practices, engine systems, electrical/electronic and emission systems, drivetrain systems, suspension/sApprenticeshipOntario
NORTHERN ALBERTA INSTITUTE OF TECHNOLOGYPre-Employment Automotive Service Technician – NORTHERN ALBERTA INSTITUTE OF TECHNOLOGYThe Pre-employment Automotive Service Technician program is a short-term program that combines applied academic skills, employability skills and introductory trade/occupation competencies, preparing grads for entry-level positions in the automotive industCore TrainingAlberta
NORTHERN ALBERTA INSTITUTE OF TECHNOLOGYPre-Employment Auto Body Repair – NORTHERN ALBERTA INSTITUTE OF TECHNOLOGYIndustry regulations, component removal and installation, substrate preparation, welding, and basic sheet metal repair. Graduates of the program can challenge the first-period apprenticeship-related theory examination for the autobody technician program.Core TrainingAlberta
NORTHERN ALBERTA INSTITUTE OF TECHNOLOGYAutomotive Service Technican – NORTHERN ALBERTA INSTITUTE OF TECHNOLOGYAutomotive service technicians perform preventative maintenance, diagnose faulty operations and repair automotive vehicles and light trucks. The term of apprenticeship is four years including, a minimum of 1,560 hours of on-the-job training, and eight weeApprenticeshipAlberta
NORTHERN ALBERTA INSTITUTE OF TECHNOLOGYAuto Body Technician – NORTHERN ALBERTA INSTITUTE OF TECHNOLOGYRepair and replace damaged motor vehicle structures and body components, prepare for refinishing, and apply interior and exterior finishes. Specialize in prepping, refinishing, sheet metal and plastics repair, or frame straightening.ApprenticeshipAlberta
NORTH ISLAND COLLEGEWelder Apprenticeship Training – NORTH ISLAND COLLEGEAll NIC training programs follow the criteria set by the Industry Training Authority (ITA) to ensure your trade qualifications meet current industry standards. NIC offers the following apprenticeship technical training levels: WLA-100, level 1;WeldingBritish Columbia
NORTH ISLAND COLLEGEAutomotive Service Technician Foundation Harmonized Certificate – NORTH ISLAND COLLEGEYou will train in a shop similar to that found in a normal work environment. Special emphasis is placed on brake system servicing; steering, suspension service and wheel alignment; scheduled vehicle service; vehicle electrical and electronic systems; safeCore TrainingBritish Columbia
NIAGARA COLLEGE CANADAWelder Apprenticeship – NIAGARA COLLEGE CANADAAs a Welder you will have the skill set required to fabricate, join, and sculpt metal components using various methods and techniques. Welders create the framework for structures used in the construction industry. Complete 720 hours of college instructionApprenticeshipOntario
NIAGARA COLLEGE CANADAWelding Techniques – NIAGARA COLLEGE CANADAAs a welder you will be well equipped to fuse metal together with careful precision using a variety of advanced welding techniques. Gain practical experience taking metal fabrication projects from engineering drawings through cutting and forming stages toWeldingOntario
NIAGARA COLLEGE CANADAMotive Power Technician – Automotive (Co-op) – NIAGARA COLLEGE CANADAYou will be analyzing and solving complex motive system problems and diagnosing and repairing mechanical, electronic and electrical motive power components and systems. Gain practical experience using troubleshooting techniques and test equipment to suppoCore TrainingOntario
NIAGARA COLLEGE CANADAAutomotive Service Technician Pre-Apprenticeship for Women – NIAGARA COLLEGE CANADAThis Pre-Apprenticeship program is designed for the student to obtain career experience through theoretical and practical lab experiences at the college, learn about maintenance and repair services for motive power vehicles, diagnosing problems, followedCore TrainingOntario
NIAGARA COLLEGE CANADAAutomotive Service Technician Apprenticeship – NIAGARA COLLEGE CANADAAs an automotive service technician, you are trained in mechanical diagnostics, cost estimations and customer relations related to a wide range of vehicles and have the skill set required to navigate computerized diagnostic equipment.ApprenticeshipOntario
NEW BRUNSWICK COMMUNITY COLLEGE – SAINT JOHN CAMPUSAuto Body and Collision Technician – NEW BRUNSWICK COMMUNITY COLLEGE – SAINT JOHN CAMPUSRepair and restore damaged motor vehicle body parts and interior finishing components, repaint body surfaces, and repair and replace automotive glass. Learn how to prime, paint, weld, apply body filler, conduct fibreglass repair, as well as how to operateCore TrainingNew Brunswick
NEW BRUNSWICK COMMUNITY COLLEGEWelding And Metal Fabrication – NEW BRUNSWICK COMMUNITY COLLEGELearn how to read blueprints and plan and implement welding and fabrication processes, including layout through to fitting and fabrication, as well as common welding processes, such as shielded metal arc, flux cored arc, and gas metal arc.WeldingNew Brunswick
NEW BRUNSWICK COMMUNITY COLLEGEWelding – NEW BRUNSWICK COMMUNITY COLLEGEWelders use electric arc and oxy-fuel to heat and meld metal. You will learn a technical understanding of arc welding, welding safety, power sources and electrode classifications and selection.WeldingNew Brunswick
NEW BRUNSWICK COMMUNITY COLLEGEAutomotive Technology – NEW BRUNSWICK COMMUNITY COLLEGEThrough a blend of classroom and practical work, students will learn how to diagnose, service and repair complex components using mechanical skills and electronic diagnostic equipment. This apprenticeable trade will prepare students well for contemporaryCore TrainingNew Brunswick
NEW BRUNSWICK COMMUNITY COLLEGEAutomotive Service Technician – NEW BRUNSWICK COMMUNITY COLLEGEAutomotive service technicians diagnose, service and repair a wide range of vehicle issues, including: steering, electrical, suspension, brakes, engines, fuel, exhaust, electronics and accessories for these systems. Students will learn techniques such asCore TrainingNew Brunswick
NAPAN/A – NAPANAPA Autotech offers a wide variety of convenient, cost-effective ways to train automotive professionals. In addition to self-paced and eLearning, NAPA Autotech offers classes in: diagnostics, hybrid electric vehicles, heating and cooling, steering, suspeCore Skillsn/a
MOHAWK COLLEGEAutomotive Service Technician – MOHAWK COLLEGEAcquire sound theoretical knowledge and practical applications to meet the challenges of increasingly complex vehicles and testing techniques. Develop diagnostic capabilities, skills to perform maintenance and mechanical repairs, and learn about major autCore TrainingOntario
MOHAWK COLLEGEAuto Body & Collision Damage Repairer – MOHAWK COLLEGEAcquire job-specific skills to repair dents in body panels, fenders and skirting; file; sand; grind; and spray paint. Explore shrinking or stretching metal panels with heat treatment and welding breaks in body panels or structures. Understand how to testCore TrainingOntario
MOHAWK COLLEGEWelder – Apprenticeship – MOHAWK COLLEGEAcquire thorough knowledge of arc, gas and resistance welding theory, and reading and interpreting blueprints. Carry out plasma cutting and TIG welding. Learn how to fit sub assemblies and assemblies together and to prepare assemblies for welding.WeldingOntario
MINISTRY OF TRAINING, COLLEGES & UNIVERSITIESCo-op Diploma Apprenticeship Program – MINISTRY OF TRAINING, COLLEGES & UNIVERSITIESYou can take college courses and start training as an apprentice in a skilled trade through this program. Depending on the trade, you can complete the program in two years, and have both a college diploma and completed apprenticeship requirements toward yApprenticeshipN/A
MINISTRY OF TRAINING, COLLEGES & UNIVERSITIESOntario Youth Apprenticeship Program – MINISTRY OF TRAINING, COLLEGES & UNIVERSITIESIf you’re in either Grade 11 or 12, you can earn co-op education credits through work placements in a skilled trade, such as Automotive Service Technician. Co-op education credits are actual secondary school credits. It’s just that you earn them through aApprenticeshipN/A
MINISTRY OF TRAINING, COLLEGES & UNIVERSITIESPre-Apprenticeship Training – MINISTRY OF TRAINING, COLLEGES & UNIVERSITIESIf you’re interested in working in a trade but don’t have the skills or experience to get a job as an apprentice, you can apply for this training. You can get this training through different organizations, such as colleges or community agencies, across OnCore SkillsN/A
Metropolitan Car-o-liner, In.CLEM-00002 – Metropolitan Car-o-liner, In.Computerized Measuring Training. Car-O-Liner training. Running Nov. 16 and 17. Dates subject to change.Management & EstimatingNew Jeresy
MEDICINE HAT COLLEGEAutomotive Service Technician – MEDICINE HAT COLLEGEAutomotive service technicians perform preventative maintenance, diagnose faulty operations and repair automotive vehicles and light trucks. The term of apprenticeship is four years, including a minimum of 1500 hours of on-the-job training, and eight weekApprenticeshipAlberta
MANITOBA INSTITUTE OF TRADES & TECHNOLOGYAuto Mechanics – MANITOBA INSTITUTE OF TRADES & TECHNOLOGYStudents will learn theory and its practical application while working on automobiles in a shop setting, by performing repairs and by applying basic diagnostic and troubleshooting techniques.Core TrainingManitoba
LOYALIST COLLEGEAutomotive Service Technician Apprenticeship – LOYALIST COLLEGEYou can attend three full-time blocks of training, each eight weeks long, or study at Loyalist one day per week to complete your three levels. Learning combines classroom instruction and practical theory labs. Put your knowledge to the test in state-of-thApprenticeshipOntario
LETHBRIDGE COLLEGEAutomotive Service Technician – LETHBRIDGE COLLEGECourses include emission control systems; fuel systems; hybrid electrical vehicles; vehicle system management, integration and vehicle networks; manual transmissions, transaxles and clutches; and suspension and steering. You’ll spend 80 percent of your tApprenticeshipAlberta
LETHBRIDGE COLLEGEAutomotive Systems – LETHBRIDGE COLLEGEWorking in small labs with lots of hands-on practice, students will develop their understanding of automotive technology. From simple components to advanced computerized vehicle systems, students gain practical insight into cars and trucks and what makesCore TrainingAlberta
LAKELAND COLLEGEAutomotive Service Technician – LAKELAND COLLEGEYou will do preventative maintenance, diagnose faults and repair automotive vehicles and light trucks. Learn on the job, as well as during the required training periods.ApprenticeshipAlberta
LAKELAND COLLEGEWelder – Vermilion Campus – LAKELAND COLLEGEStudents will learn to use different processes depending upon the type of metal being fused. Often, they will work from a blueprint or work order to complete a project. Apprenticeship is three years with an eight-week technical training period per year.WeldingAlberta
KWANTLEN POLYTECHNIC UNIVERSITYAutomotive Service Technician – Apprenticeship – KWANTLEN POLYTECHNIC UNIVERSITYKPU delivers in-school technical training for Automotive Service Technician apprenticeship levels 1, 2, 3 and 4. The in-school technical training varies for each level and is 6 to 7 weeks in duration.ApprenticeshipBritish Columbia
KWANTLEN POLYTECHNIC UNIVERSITYAutomotive Service Technician Certificate (Foundation) – KWANTLEN POLYTECHNIC UNIVERSITYRepairing customer vehicles in a fully operational auto repair shop. Shop safety, inspection, diagnostics, repair and servicing of mechanical, electrical and electronic systems for automobiles and light trucks.Core TrainingBritish Columbia
KEYANO COLLEGEWelder – Apprenticeship – KEYANO COLLEGEGraduates from the program will be skilled in the fusing of metals using prescribed welding applications; have a working knowledge of welding equipment; comprehend drawings and develop layout patterns for projects and calculate quantities of materials; haApprenticeshipAlberta
I-CARDAM05 Aluminum Panels and Structures Damage Analysis (IL French and English) – I-CARExplain aluminum properties and identify differences. Analyze damage to aluminum exterior panels and identify repair procedures. Analyze damage to aluminum structural parts and understand repair considerations. Identify different areas of a repair facilitManagement & EstimatingOntario
I-CARRCY01 Recycled Parts for Collision Repair – I-CARUnderstand the automotive recycling industry and organizations. Describe the considerations for using and ordering recycled parts. Identify parts that are commonly recycled and those that are not. Determine if a part has been previously repaired. UnderstaManagement & EstimatingOntario
I-CARQUA01 – Inspecting Repairs For Quality Control – I-CARExplain the importance of conducting post-repair inspections. Identify repairs that should be inspected before coatings are applied. Explain how to use various inspection tools to access hard-to-see repair areas. Identify refinish defects and signs of impManagement & EstimatingOntario
I-CARPM145L01 Refining the Team and the Business РI-CARPerform human capital functions using human resources guidelines and business rules. Identify production staffing needs using a staffing model. Schedule team members’ vacations using a management system and calendar. Verify that team members’ trainingManagement & EstimatingOntario
I-CARPM140V01 Developing the Team and the Business – I-CARPerform employee mentoring/coaching using various leadership models. Perform team member reviews using a management system. Co-ordinate team member training and safety-related needs. Communicate shop metrics to leadership team using a management system. MManagement & EstimatingOntario
I-CARPM135E01 Optimizing Processes, Equipment and Compliance – I-CARExplain the 5S lean process and how it relates to optimized workflow. Inspect the building to determine maintenance issues. Understand parking lot, building and vehicle security measures. Know the importance of equipment maintenance and maintenance scheduManagement & EstimatingOntario
I-CARPM130E01 Quality is Your Business – I-CARVerify technicians and complete quality-control checklists using shop SOPs. Match parts invoices to the repair order invoice. Verify that customer requests are completed. Compare all repair orders, sublet work and supplemental. Discuss the importance of qManagement & EstimatingOntario
I-CARPM125V01 Problem Solving for Workflow Changes – I-CARAssess workflow problems and evaluate work-in-progess for potential solutions. Determine technician workload. Determine staffing needs based on workflow problems and how to reassign technician work based on skill, OEM training and/ or availability. ManageManagement & EstimatingOntario
I-CARPM120L01 Synchronizing Workflow through Team Communication – I-CARRecognize the tools needed to conduct review-and-release meetings with technicians. Understand the value of using and updating a computer management system. Identify the communication methods needed to properly share information with the team. Know the prManagement & EstimatingOntario
I-CARPM115E01 Workflow Essentials – I-CARUnderstand how supplements affect production, costs and staff by identifying missing items, time involved and repair or replace decisions for each job. Survey the shop floor using the quality control, roadblock, and parts status techniques taught in thisManagement & EstimatingOntario
I-CARPM110V01 Matching the Repair to the Team – I-CARIdentify staff capabilities and workload using a computer management system. Explain how to assign a job to an available technician or team. Perform estimate and vehicle reviews with assigned technician using shop SOPs. Communicate current job status usinManagement & EstimatingOntario
I-CARPM105E01 Before the Repair Starts – I-CARDemonstrate job file review processes. Explain insurance needs (including DRP and non-DRP). Identify express jobs using a checklist of express-related items. Demonstrate mappingof a customer vehicle.Management & EstimatingOntario
I-CARPM101E01 Learning Culture Overview – I-CARUnderstand the importance of the I-CAR study observations. Describe an Industrial Age mind set and how to identify it. Apply the principles of knowledge management. Understand the definition, key principles and benefits of a learning culture.Management & EstimatingOntario
I-CARDAM15 Advanced Steering and Suspension Systems Damage Analysis (IL English and French) – I-CARUnderstand electronically controlled steering and suspension systems and damage analysis considerations, plus identify parts and understand their operation. Identify tire pressure monitoring systems and parts.Management & EstimatingOntario
I-CARDAM13e Basic Electronics Damage Analysis – I-CARIdentify the basic requirements for a circuit and understand how circuit values are measured. Understand other parts of a circuit. Recognize collision damage to wiring and the possibilities for repair. Identify the tools and steps required when troubleshoManagement & EstimatingOntario
I-CARDAM07 Damage Analysis of Advanced Automotive Systems (IL English and French) – I-CARIdentify whether a vehicle is equipped with various advanced vehicle systems. Understand how specific features are designed to operate and how they are integrated with other vehicle systems. Determine if a system is operating properly during the damage anManagement & EstimatingOntario
I-CARDAM03 Mechanical Systems Analysis – I-CARInspecting HVAC systems. Inspecting electrical systems. Inspecting gasoline-electric hybrid vehicles. Inspecting electro mechanical vehicle options. Inspecting drivetrain. Inspecting brake systems.Management & EstimatingOntario
I-CARDAM01 Vehicle Identification, Estimating Systems, and Terminology – I-CARInterpreting damage reports. Understanding industry definitions. Identifying types of finishes. Obtaining vehicle information. Writing a damage report.Management & EstimatingOntario
I-CARALT03 Alternative Fuel Vehicle Damage Analysis and Safety – I-CARSee description in Health & Safety section.Management & EstimatingOntario
I-CARALT02 Hybrid Electric And Alternative Fuel Vehicles (IL English and French) – I-CARSee description in Health & Safety section.Management & EstimatingOntario
I-CARGE001L01 Understanding Cycle Time Process – I-CARManufacturing trends, new equipment, materials and procedures for American and foreign vehicle brands. Also covers an introduction to diagnostics and scan tools, inlcuding OE posiitons, shop standard operating procedures, and OEM and aftermarket scan toolManagement & EstimatingOntario
I-CARDAM12 Steel Structures Damage Analysis (IL English and French) – I-CARAfter completing this course, you will be able to: identify the different types of vehicle designs; explain how unitized structures are designed to collapse; understand how different impact angles transfer collision energy and create different types of daManagement & EstimatingOntario
I-CARDAM11 Restraint Systems Damage Analysis (IL English Only) – I-CARAfter completing this course, you will be able to: identify the various types of passive restraint systems and their parts; understand required replacement or inspections for passive restraint-system parts; identify seatbelt system parts and proper operatManagement & EstimatingOntario
I-CARDAM10 Exterior Panels Damage Analysis (IL French and English) – I-CARAfter completing this course, you will be able to: identify parts of the front bumper assembly and recognize damage to side body panels; recognize front exterior body panels and front lighting systems; be able to identify door damage and make repair vs. rManagement & EstimatingOntario
I-CARDAM08 Advanced Material Damage Analysis (IL English and French) – I-CARIdentify advanced materials and describe their characteristics and applications. Explain how advanced vehicle construction materials affect collision energy -management and damage analysis considerations. Make repair vs. replace decisions for specific advManagement & EstimatingOntario
I-CARDAM06 Steering And Suspension Damage Analysis (IL English and French) – I-CARLearning objectives: understand general concepts for steering and suspension systems. Identify damaged steering and suspension parts; determine damaged parts that cause steering and wheel-tracking problems; analyze caster, camber, toe, and other alignmentManagement & EstimatingOntario
I-CARSPS09 Best Practices For High-Strength Steel Repairs (IL English and French) – I-CARObjectives: Identify how to test for HSS and UHSS, and common locations UHSS can be found. Understand the considerations and implications of heating HSS and UHSS. Understand best practices for removing and attaching parts on HSS and UHSS vehicles. UnderstStructural RepairOntario
I-CARSPS08 Steel Full-Frame Technologies and Repair (IL English and French) – I-CARObjectives: Identify trends in full-frame vehicle design and construction. Identify issues related to full-frame repair. Repair full-frame and unitized body damage following vehicle maker and procedures.Structural RepairOntario
I-CARSPS07 Steel Unitized Structures Technologies and Repair (IL English and French) – I-CARObjectives: Describe basic metallurgy and its impact on the collision repair industry. Explain how the use of new materials used in vehicles relates to collision repair dynamics. Understand why vehicle makers are moving toward advanced high- strength steeStructural RepairOntario
I-CARSPS03 Steel Full-Frame Sectioning (IL English and French) – I-CARObjectives: Identify body-over-frame designs. Analyze full-frame damage. Repair cracks in full frames. Examples of OEM full-frame sectioning procedures. Analyzing and repairing full-frame attachments. Repair vehicle body assembly.Structural RepairOntario
I-CARMEA01 Measuring (IL English and French) – I-CARObjectives: Identify point-to-point measuring equipment and operation. Identify three- dimensional measuring equipment and operation. Understand vehicle dimension specifications. Make vehicle measurements.Structural RepairOntario
I-CARHON11e Honda & Acura High-Strength Steel Repair (IL English and French) – I-CARSee description in OEM-Specific Training section.Structural RepairOntario
I-CARGLA02 Stationary Glass IL English and French) – I-CARObjectives: Understand the role of stationary glass. Identify glass construction and stationary glass adhesive. Explain methods for removing and installing a windshield. Describe proper pinchweld preparation. Recognize steps for preparing the glass and apStructural RepairOntario
I-CARFFR01 Full Frame Partial Replacement (IL English and French) – I-CARObjectives: Understand OEM repair procedures for many current full-frame vehicles. Identify various full-frame designs, construction methods and repair considerations. Understand partial replacement at factory seams and sectioning options for full-frame vStructural RepairOntario
I-CARDTS01e Cadillac DTS Front Lower Rail Replacement – I-CARSee description in OEM-Specific Training section.Structural RepairOntario
I-CARCAL01 Dodge Caliber Front Rail Replacement – I-CARDodge Caliber front rail replacement.Structural RepairOntario
I-CARTRM03e Removing and Installing Exterior Trim, Pinstripes, and Decals (IL English and French) – I-CARSee description in Non-Structural section.Paint & RefinishingOntario
I-CARREF09 – Color Theory, Mixing Toners, and Tinting (IL English and French) – I-CARIdentify how tri-coat finish affects colour. Understand how metallics and pearls affect colors. Recognize how a refinish formula is chosen. Explain how to mix toners to make the base coat. Describe how to evaluate a spray-out panel to the vehicle. DistingPaint & RefinishingOntario
I-CARREF07 Waterborne Products, Systems, and Application (IL English and French) – I-CARExplain why waterborne products are used and which waterborne products are available. Understand the difference between waterborne and solvent- borne refinishing materials. Identify the environmental impact and reasons for converting to waterborne refinisPaint & RefinishingOntario
I-CARREF04 Detailing (IL English and French) – I-CARPerform a thorough vehicle inspection and identify defects in a vehicle finish. Be able to remove finish defects by using the proper removal procedures. Understand interior and exterior detailing.Paint & RefinishingOntario
I-CARREF02 Surface Preparation and Masking (IL English and French) – I-CARFinish identification; masking; understanding proper spray gun technique; preparing substrates and applying primers; and making test panels.Paint & RefinishingOntario
I-CARREF01 Refinishing Equipment and VOC Regulations (IL English and French) – I-CARUnderstanding spray guns; using compressed air; creating the proper spray environment; understanding VOC rules and regulations; and mixing refinish materials.Paint & RefinishingOntario
I-CARCPS01 Corrosion Protection (IL English and French) – I-CARSee description in Non-structural section.Paint & RefinishingOntario
I-CARVT275E01 Collision Repair for the 2019 Chevrolet Silverado/ GMC Sierra – I-CARAfter completing this course, students will be able to identify the body changes to the 2019 Chevrolet Silverado/GMC Sierra; describe the differences in the repair procedures for the truck models; identify the metals used in the body, unitized structure aOEM Specific TrainingOntario
I-CARVT245E01 Using Vehicle Maker Repair Procedures – I-CARCourse provides an overview of the importance of following OEM-specific repair requirements and the many resources available to find them. Topics that will be covered are OEM-specific websites, I-CAR resources, service bulletins and other resources.OEM Specific TrainingOntario
I-CARVT240E01 Understanding Volvo Collision Repair (English only) – I-CARParticipants will be able to understand the collision repair procedures and requirements for the Volvo model line and describe how to navigate through the Volvo repair information website.OEM Specific TrainingOntario
I-CARVT230E01 Understanding Volkswagen Collision Repair (English only) – I-CARParticipants will be able to understand the collision repair procedures and requirements for the Volkswagen model line. Describe how to navigate through the Volkswagen repair information website, and explain the mandatory steps for repairing Volkswagen veOEM Specific TrainingOntario
I-CARVT225E01 General Motors (GM) Company Collision Repair Overview РI-CARParticipants will be able to describe the new way body repair information is being provided on the GM repair website, list several sources of repair information for GM vehicles and understand GM’s calibration requirements for different advanced driver-aOEM Specific TrainingOntario
I-CARVT205E01 Fiat Chrysler Automobiles (FCA) Collision Repair Overview – I-CARFiat Chrysler collision repair overview.OEM Specific TrainingOntario
I-CARNI007E01 Nissan LEAF Technologies and Repair Considerations РI-CARNissan LEAF technologies and repair considerations is a one-hour course focusing on the 2018 Nissan LEAF’s features and technologies, such as ProPILOT Assist, e-Pedal and other intelligent driving features. Calibration procedures for ADAS systems and reOEM Specific TrainingOntario
I-CARHON12e Honda & Acura Restraints Collision Repair (IL French and English) – I-CARLocate the Honda and Acura service information necessary for restraint systems post-collision repairs. Identify repair and inspection procedures required to restore Honda and Acura restraint systems after deployment. Obtain and confirm that the correct HoOEM Specific TrainingOntario
I-CARHON11e Honda & Acura High-Strength Steel Repair (IL French and English) – I-CARIdentify the different grades of high-strength steel parts used in Honda and Acura vehicles. Identify high-strength steel parts and locate repair instructions using Honda and Acura service information. Clearly define approved repair methods for differentOEM Specific TrainingOntario
I-CARHON10e Using Honda and Acura Service Information (IL French and English) – I-CARState why using factory service information is critical and recognize the possible consequences of not using it. Identify Honda and Acura service publications. Navigate ServiceExpress to find basic service information. Locate frequently used Honda and AcuOEM Specific TrainingOntario
I-CARHON01 Collision Repair for Honda and Acura Vehicles (IL French and English) – I-CARProvides up-to-date technical information on current Honda and Acura vehicle models, vehicle features, general repair considerations, and more. Identify current vehicle models and service and repair information. Recognize vehicle materials and features anOEM Specific TrainingOntario
I-CARGMC02 Online General Motors Stationary Glass Replacement – I-CARThe learning objectives for this program include: explaining the structural role of the windshield in vehicle design; listing the safety standards set forth by the Federal Motor Vehicle Safety Standards; identifying GM adhesive recommendations; identifyinOEM Specific TrainingOntario
I-CARGEN03 Collision Repair for General Motors Vehicles – I-CARIdentify service information sources, restraints, and steering and suspension systems for GM vehicles. Explain construction materials and general repair processes for GM vehicles. Understand repair and replacement considerations and procedures for specifiOEM Specific TrainingOntario
I-CARGEN01 Collision Repair Overview for the Chevrolet Corvette Z06 – I-CARLocating GM service information. Identifying the construction materials. Making non-structural repairs. Using GMA (MIG) pulse welding equipment. Making structural repairs.OEM Specific TrainingOntario
I-CARFOR05 Collision Repair for Ford and Lincoln Vehicles – I-CARIdentify current Ford and Lincoln vehicle models and their service and repair options. Explain Ford Motor collision repair position statements. Identify materials, joining methods and repair considerations for Ford and Lincoln vehicles. Explain corrosionOEM Specific TrainingOntario
I-CARDTS01e Cadillac DTS Front Lower Rail Replacement – I-CARIdentify parts related to the repair procedure, required materials and equipment, removal and installation procedures. Understand considerations surronding straightening steel parts. Understand procedures for full part replacement. Identify mechanical andOEM Specific TrainingOntario
I-CARTRM03e Removing and Installing Exterior Trim, Pinstripes and Decals (IL English and French) – I-CARDescribe methods for application and removal of pinstripes and decals. Explain processes for installing door trim panels, handles, and lock cylinders. Identify interior and exterior parts and understand how to remove and replace them.Non-Structural RepairOntario
I-CARPLA03 Plastic and Composite Repair (IL English and French) РI-CARIdentify different types of plastics by their characteristics. Understand correct preparation procedures for plastics. Identify different types of plastics used on today’s vehicles and the correct methods to repair each. Recognize proper adhesives for dNon-Structural RepairOntario
I-CARLSC04e Automotive Lighting (IL English and French) – I-CARIdentify interior and exterior lamps, as well as different types of headlamps. Describe repair considerations surrounding operation and repair of headlamps. Understand collision-related problems in exterior and interior lighting.Non-Structural RepairOntario
I-CARHEA03e Working with Coolant and HVAC Controls (IL English and French) – I-CARIdentify types of engine coolant. Understand HVAC parts and controls.Non-Structural RepairOntario
I-CARHEA02e Cooling System Operation and Parts (IL English and French) – I-CARThis training teaches you to understand cooling system operation and how to properly inspect parts. Understand the function of radiators and water pumps, plus considerations for repairing different types of water pumps. Identify auxiliary coolers and tempNon-Structural RepairOntario
I-CARGLA01 Movable Glass (IL English and French) – I-CARThis training teaches you to identify the roles of movable glass in vehicles and types of drive mechanisms. Understand considerations for replacing rear body and side door glass. Describe parts of window regulators and window channels. Understand removalNon-Structural RepairOntario
I-CARFOM01 Automotive Foams (IL English and French) – I-CARThis training teaches you to understand uses and application procedures for automotive foam. Understand structural foam considerations and curing methods. Identify procedures related to installation of expandable foam. Understand how to choose correct repNon-Structural RepairOntario
I-CAREXT04e Bolted-On Exterior Panels, Part 2 (IL English and French) – I-CARThis training teaches you how to identify and understand considerations related to bolted-on exterior panel replacement parts; replacing bumpers, hoods and fenders; and removing and installing rear closure panels.Non-Structural RepairOntario
I-CARCPS01 Corrosion Protection (IL English and French) – I-CARThis training teaches you to recognize causes of corrosion and understand the corrosion protection processes of manufacturers. Identify the steps required in determining where to apply anti-corrosion compounds and undercoatings. Understand the consideratiNon-Structural RepairOntario
I-CARAIR03e Air Conditioning, Part 2 (IL English and French) – I-CARThis training teaches you to identify, diagnose and troubleshoot air conditioning system operations. Identify HVAC systems.Non-Structural RepairOntario
I-CARAIR02e Air Conditioning, Part 1 (IL English and French) – I-CARThis trainings teaches you to understand air conditioning system operation and identify refrigerant and oils and to understand air conditioning service tools and equipment used for specific repair processes.Non-Structural RepairOntario
I-CARADH01 Adhesive Bonding (IL English and French) – I-CARObjectives: Identify adhesive bonding materials and describe differences. Explain considerations surrounding the working with adhesives. Know how to prepare adhesives for application and use them for panel attachment. Identify and work with one- and two-pStructural RepairOntario
I-CARISS00 Intro to Safety Systems – I-CARAn introduction to safety systems.Health & SafetyOntario
I-CARIPS00 Intro to Personal Safety – I-CARAn introduction to personal safety.Health & SafetyOntario
I-CARHAP01 Online – Hazardous Airborne Pollutant Reduction – I-CARThis training will teach you to explain and evaluate EPA regulations, identify hazardous air pollutants (HAP), use the appropriate personal protection equipment, identifying how to reduce consumption of methylene chloride (MeCl) paint stripper, identify sHealth & SafetyOntario
I-CARALT03 Alternative Fuel Vehicle Damage Analysis and Safety – I-CARObjectives: explain how to take safe measures when working on hybrid electric and alternative-fuel vehicles; understand high-voltage issues with electric A/C5 systems; identify new applications for hybrid technology and unique hybrid system features; knowHealth & SafetyOntario
I-CARALT02 Hybrid Electric And Alternative Fuel Vehicles (IL English and French) – I-CARParticipants will be able to protect themselves and others when disconnecting high voltage on BAS, two-mode and other hybrid electric vehicle applications; avoid costly mistakes associated with incorrect repairs; be able to perform thorough damage analysiHealth & SafetyOntario
I-CARWCS03 Steel GMA (MIG) Welding Qualification Series (no IL version) – I-CARThe Steel GMA (MIG) Welding Qualification Series begins with a brief presentation of machine setup and maintenance of steel GMA (MIG) welding, as well as provides information on weld defect identification and correction, and how welds will be visually andWeldingOntario
I-CARWCA05 Ford Aluminum GMA (MIG) Welding (no IL version) – I-CARSee description in Aluminum section.WeldingOntario
I-CARWCA03 Aluminum GMA (MIG) Welding Qualification Series (no IL version) – I-CARSee description in Aluminum section.WeldingOntario
I-CARST085L01 Measuring, Anchoring and Pulling Strategies, Hands-on Skill Development – I-CARStudents are expected to: Correctly set up the measuring equipment; identify vehicle specifications; make 3D measurements; and interpret and discuss measurement results.Structural RepairOntario
I-CARSSS01 Structural Straightening Steel (IL English and French) – I-CARObjectives: Understand when to use heat for straightening and the proper use and control of heat to retain structural integrity. Gauge when straightening is needed for a repair and when it is needed to prepare for a replacement procedure. Determine variouStructural RepairOntario
I-CARSPS11 Sectioning of Steel Unitized Structures (IL English and French) – I-CARObjectives: Understand why I-CAR has adapted its position on sectioning and why general sectioning guidelines no longer apply. Understand the various types of sectioning joints used by vehicle makers. Considerations for sectioning vs. part replacement.Structural RepairOntario
I-CARSPS10 Replacement of Steel Unitized Structures (IL English and French) – I-CARThis course’s objectives include, removing and replacing spot welds and OEM laser welds; when to replace at factory seams and when to fully replace a steel unitized part. As well as, considerations for working with other materials, such as aluminum, magneStructural RepairOntario
I-CARSPS05 Structural Parts Steel Qualification Series (no IL Version) РI-CARIn order to take SPS05, you must have a current WCS03 –Steel GMA (MIG) Welding Qualification. Successful completion of SPS05 brings an automatic renewal of WCS03. The principles and techniques of structural steel sectioning are covered. Welding principlStructural RepairOntario
I-CARTRM02e Removing and Installing Hardware Interior Trim (IL English and French) – I-CARSee description in Non-Structural section.Paint & RefinishingOntario
I-CARWCA05 Ford Aluminum GMA (MIG) Welding (no IL version) – I-CARSee description in Aluminum section.OEM Specific TrainingOntario
I-CARFRD01 Collision Repair Overview for the Ford F-150 – I-CARDetermining vehicle service information and identification. Working with trim, hardware and glass. Identifying construction materials. Replacing and aligning exterior panels. Understanding mechanical and restraint systems. Making frame repairs.OEM Specific TrainingOntario
I-CARFOR06 2015 Ford F-150 Structural Repair Training Course (IL English and French) – I-CARIn this program students will develop an understanding of safe practices when working with aluminum; identify the Ford heating limits for straightening; understand Ford’s position on repairing cracks in aluminum parts and in the frame assembly; determineOEM Specific TrainingOntario
I-CARWNW01 Wind Noise and Water Leaks (IL English and French) – I-CARIn this course student wil identify causes of and understanding the effects of wind noise and water leaks; diagnostic procedures for locating wind noise and water leaks; identify repair materials and repairing wind noise and water leaks.Non-Structural RepairOntario
I-CARTRM02e Removing and Installing Hardware Interior Trim (IL English and French) – I-CARIn this course student will identify hardware and understand its correct uses and how to work with trim and mouldings.Non-Structural RepairOntario
I-CARSTS01 Cosmetic Straightening Steel (IL English and French) – I-CARIn this program student will identify characteristics and considerations for steel repairs; examine different types of damage and understand repair procedures; develop an understanding of procedures and considerations for application of paintless dent repNon-Structural RepairOntario
I-CARSTE04 Wheel Alignment and Diagnostic Angles (IL English and French) – I-CARIn this course students will perform wheel alignments, develop an understanding of diagnostic measurements, measure and adjust caster, camber and toe.Non-Structural RepairOntario
I-CARSTE03 Rack and Pinion and Parallelogram Steering Systems (IL English and French) – I-CARIn this course students will learn about diagnosing steering wheel and column damage. How to identifying parallelogram, and rack and pinion steering systems. And, develop an understanding of power steering systems.Non-Structural RepairOntario
I-CARSTE02 Suspension Systems (IL English and French) – I-CARIn this course students will develop an understanding of front and rear suspension designs, repair issues and ride dampeners.Non-Structural RepairOntario
I-CAREXT03e Bolted-On Exterior Panels, Part 1 (IL English and French) – I-CARThis course will help students identify and understand considerations surrounding working with bolted-on exterior panel replacement parts. As well as understanding the removal and installation procedures for doors. Students will analyze and diagnose the sNon-Structural RepairOntario
I-CARWCA05 Ford Aluminum GMA (MIG) Welding – I-CARThis series includes instruction, hands-on practice and testing for welds used in repairing aluminum vehicle structures. Participants are instructed how to set up and tune a welding machine, address safety issues, prepare metal surfaces and perform properAluminumOntario
I-CARWCA03 Aluminum GMA (MIG) Welding Qualification Series – I-CARThis series includes instruction, hands-on practice and testing for welds used in repairing aluminum vehicle structures. Participants are instructed how to set up and tune a welding machine, address safety issues, prepare metal surfaces and perform properAluminumOntario
I-CARFOR06 2015 Ford F-150 Structural Repair Training Course (IL English and French) – I-CARSee description in OEM-Specific Training section.Structural RepairOntario
I-CARAPR01 Aluminum Exterior Panel Repair and Replacement (IL English and French) – I-CARThis course will explain how hardening changes the characteristics of aluminum. it will also cover how to use dye penetrant for locating damage; how to reduce cross-contamination between metals; explain the importance of using dedicated tools for workingAluminumOntario
I-CARALI01 Aluminum Intensive Vehicle Repairs (IL English and French) – I-CARThis course focuses on understanding aluminum in structural applications; identifying uses of castings and repair or replace considerations; preventing galvanic corrosion; straightening considerations, including work hardening and workability; and workingAluminumOntario
HOLLAND COLLEGEAutomotive Technology – HOLLAND COLLEGEThis program will help students develop a solid grounding in the computers, networks, electronics and other non-mechanical systems that make up today’s automobiles. Students will learn theory in the classroom or online and hands-on practice in the shop. ACore TrainingPrince Edward Island
GRANDE PRAIRIE REGIONAL COLLEGEAutomotive Service Technician – GRANDE PRAIRIE REGIONAL COLLEGEAutomotive service technicians perform preventative maintenance, diagnose faulty operations and repair automotive vehicles and light trucks. The term of apprenticeship is four years; including a minimum of 1,560 hours of on-the-job training, and eight weeApprenticeshipAlberta
GLOBAL FINISHING SOLUTIONSN/A – GLOBAL FINISHING SOLUTIONSTo ensure our customers maximize all of the benefits that our products offer, Global Finishing Solutions provides extensive training to improve quality and efficiency. Our revolutionary Center for Excellence training facility provides prospective and currPaint & Refinishingn/a
GEORGIAN COLLEGEAutomotive Business – GEORGIAN COLLEGEIn this program students will gain opportunities to explore possibilities of entrepreneurship within the automotive industry. Introductory business courses and specific automotive courses, as well as co-operative work experience and networking opportunitiManagement & EstimatingOntario
GEORGIAN COLLEGEBachelor of Business Administration (Automotive Management) – GEORGIAN COLLEGEA degree-level education in business management with a focus on the automotive industry. This program covers current issues, trends and technologies, plus adopting proactive approaches in identifying and responding to changes in the automotive industry. IManagement & EstimatingOntario
GEORGIAN COLLEGEWelding Techniques – GEORGIAN COLLEGEStudents are provided with the theoretical and practical training to perform most basic welding techniques. At the completion of the program, students are eligible to test for welding tickets based on their level of expertise.WeldingOntario
FLEMING COLLEGEWelding Techniques – FLEMING COLLEGEThe curriculum in this program has been aligned to the basic requirements for Level 1 apprenticeship training for welding fabrication. The program will introduce you to numerous welding processes and you will gain extensive hands-on experience on the mostWeldingOntario
FLAT LINEN/A – FLAT LINECar-O-Liner 3D measuring training can be done on-site in your shop or at our training facility in Richmond Hill, Ont. If you have a system, but have a new technician who needs to be trained, we can help. We cover the many functions and capabilities of theWelding; small damage repair; medium panel steel repair; aluminum panel repair; plastic repair; and estimation skillsOntario
FANSHAWE COLLEGEAuto Body Repair Techniques – FANSHAWE COLLEGEIn this program students will develop a strong understanding of the technologies and techniques used, perfect craftsmanship through actual repairs in our state-of-the-art repair shop.Core TrainingOntario
FANSHAWE COLLEGEAutomotive Service Technician (GM-ASEP) [Apprenticeship] – FANSHAWE COLLEGELearn cutting-edge General Motors (GM) vehicle repair techniques, how to diagnose, repair and maintain GM cars and trucks from bumper to bumper.ApprenticeshipOntario
FANSHAWE COLLEGEAutomotive Service Technician (Day Release) [Apprenticeship] – FANSHAWE COLLEGELearn how to diagnose, repair and maintain engines and many electrical and electronic systems in cars, trucks and buses. Students will also have the opportunity to specialize in engine and fuel systems, electrical and electronic systems, suspension or brApprenticeshipOntario
FANSHAWE COLLEGEAuto Body and Collision Damage Repairer (Branch I – Block Release) [Apprenticeship] – FANSHAWE COLLEGEStudents will restore, repair and replace autobody parts and interior finishing. They will also assess damage and estimate the cost of repairs, plus operate welding equipment, while learning the skills necessary to prepare and refinish today’s high-end toApprenticeshipOntario
ELV SELECTELV Select Training – ELV SELECTELV Select offers complete vehicle decommissioning and depollution training to comply with ministry of environment standards and procedures. Additionally, end users will be able to employ best practises to remain as efficient as possible. This training isRecycling TrainingOntario
Elite Body Shop SolutionsOperations Monthly LIVE – Elite Body Shop SolutionsGet high-impact operations and management training with tools and support for real world application. OML includes: a 1-hr LIVE monthly training, a library to organize all past and future training, downloadable tools and support documents for application,OtherNolensville, TN 37135
EDUCATIONAL SEMINARS INSTITUTEAutomotive Webinars – EDUCATIONAL SEMINARS INSTITUTEWith decades of automotive coaching and experience within the automotive industry, each member of Team ESi prides ourselves in our honesty, depth of knowledge, integrity, and expertise through our free webinar series. When you are ready to gain control ofManagementCalifornia
EDUCATIONAL SEMINARS INSTITUTEAutomotive Training – EDUCATIONAL SEMINARS INSTITUTEWhen you are ready to gain control of your business, ESi, Educational Seminars Institute, is your premier source for automotive training through auto repair management consulting, service advisor training, and automotive coaching. Through our custom-tailoManagementCalifornia
DURHAM COLLEGE, WHITBY CAMPUSAutomotive Technician – Service and Management (Motive Power Technician) – DURHAM COLLEGE, WHITBY CAMPUSThis training teaches how to create work orders; diagnose engines, electrical/fuel systems, motive power driveline, directional control systems (steering, suspension and brakes) and air conditioning; understand management principles, such as business struCore TrainingOntario
DURHAM COLLEGE, WHITBY CAMPUSWelding Engineering Technician – DURHAM COLLEGE, WHITBY CAMPUSThis program will teach students to create and read blueprints; give them the skills of fitting metals and understanding their characteristics; equip them to work safely in the industry; and give them practical experience in welding shop and inspection meWeldingOntario
DAVE LUEHR’S ELITE BODY SHOP ACADEMYN/A – DAVE LUEHR’S ELITE BODY SHOP ACADEMYEach month, participants can join Dave’s one-hour webinar to improve your skills, get your questions answered directly by Dave and interact with other successful body shop operators. These livecasts blend world-class operational techniques and strategiesManagement & EstimatingN/A
CONFEDERATION COLLEGEMotive Power Techniques – Automotive – CONFEDERATION COLLEGEThis training covers all the basics of maintaining and repairing vehicle systems, such as electrical/electronics, fuels, brakes, gear trains, steering and suspension on motor vehicles and light trucks.Core TrainingOntario
CONFEDERATION COLLEGEMechanical Techniques – CONFEDERATION COLLEGEThis training combines in-class learning with practical demonstrations and hands-on instruction. Topics include mechanical practices, machine shop, welding practices, trades science, engineering graphics and industrial design.Core TrainingOntario
CONFEDERATION COLLEGEAutomotive Service Technician Apprenticeship – CONFEDERATION COLLEGETraining includes work practices, engine systems, electrical, electronic, emissions and fuels, drivetrain systems and suspensions, steering and brake systems, air conditioning systems.ApprenticeshipOntario
CONESTOGA COLLEGEAutomotive Service Technician – Apprenticeship – CONESTOGA COLLEGEThis 720-hour program, consisting of three components, is designed to provide theoretical knowledge of all aspects of automotive repair, as well as practical training.ApprenticeshipOntario
CONESTOGA COLLEGEMotive Power Technician – Automotive Service – CONESTOGA COLLEGEThis training provides a strong technical base and also focuses on motive power business, shop management and parts management. The program is structured to provide the theoretical and work-related experience that registered apprentices normally acquire iCore TrainingOntario
CONESTOGA COLLEGEMotive Power Fundamentals – Automotive Repair – CONESTOGA COLLEGEAt the pre-apprenticeship level, students will receive the theoretical and hands-on shop experience that registered apprentices would normally acquire in the workplace in addition to trade-related skills. You will develop safe working practices in the useCore TrainingOntario
COLOR COMPASS UNIVERSITYN/A – COLOR COMPASS UNIVERSITYColor Compass University offers both scheduled and on-demand technical training and business-management workshops, from comprehensive welding training utilizing the latest in equipment to industry-leading production, business management and financial perfWelding Managementn/a
COLLISION ADVICEKPI Basics – COLLISION ADVICEThis training outlines the basics of Key Performance Indicators (KPIs). The course covers the five categories of collision repair center KPI’s, which include; financial, estimating, cycle time, parts and CSI.Management & EstimatingVirginia
COLLISION ADVICEProfitability for Collision Repair – COLLISION ADVICEThis training focuses on the essentials of collision repair profitability. This includes topics such as calculating gross and net profit, calculating break-even, ways to increase revenue, optimizing your sales mix, and improving labor, parts, painting matManagement & EstimatingVirginia
COLLISION ADVICEYou Don’t Know What You Don’t Know – COLLISION ADVICEThis training outlines why it is important to research OEM repair procedures and why we need to scan vehicles before and after repairs.Management & EstimatingVirginia
COLLISION ADVICEScheduling Best Practices – COLLISION ADVICEThis training discusses benefits gained through proper scheduling, such as even flow, balance, best use of resources, pay consistency, reduced cycle time, improved touch time and, most important, improved profitability.Management & EstimatingVirginia
COLLISION ADVICEParts Management for Collision Repair – COLLISION ADVICEThis training highlights methods to improve the parts-management process, including a parts-management overview, parts manager responsibilities and best practices for each step in the parts-management process.Management & EstimatingVirginia
COLLISION ADVICEManagement’s Guide to Scanning and New Technology – COLLISION ADVICEThis Red Seal program contains components of the Welder, Metal Fabricator and Non-Destructive Testing Technician programs. At the end of the two years you will have two entry level certificates. Some of the duties include, developing patterns or followingManagement & EstimatingVirginia
COLLISION ADVICEJob Costing for Collision Repair – COLLISION ADVICEThis training provides a basic understanding of job costing. This course covers in job costing overview and provides insights on what impacts body, paint and related materials, parts and sublet profitability.Management & EstimatingVirginia
COLLISION ADVICEEstimating Best Practices – COLLISION ADVICEThis training teaches a systematic approach to discovering and ensuring that all the “Not Included” items required to restore a vheicle to pre-accident condition are inlcuded in the repair plan.Management & EstimatingVirginia
COLLEGE OF THE ROCKIESAutomotive Service Technician – Foundation – COLLEGE OF THE ROCKIESThis training teaches Automotive Service Technicians inspect, diagnose, repair, and service systems in cars, buses, motorcycles, and light and commercial transport trucks and need to keep pace with the fast changing world of automotive technology.Core TrainingBritish Columbia
COLLEGE OF THE ROCKIESAutomotive Service Technician – Apprenticeship – COLLEGE OF THE ROCKIESAutomotive Service Technician students inspect, diagnose, repair, and service systems in cars, buses, motorcycles, and light and commercial transport trucks and need to keep pace with the fast changing world of automotive technology.ApprenticeshipBritish Columbia
COLLEGE OF THE NORTH ATLANTICWelder Metal Fabricator – COLLEGE OF THE NORTH ATLANTICThis red seal program contains components of the Welder, Metal Fabricator and Non-Destructive Testing Technician programs. At the end of the two years you will have two entry level certificates. Some of the duties include: Develop patterns or follow dirWeldingNewfoundland
COLLEGE OF THE NORTH ATLANTICWelder – COLLEGE OF THE NORTH ATLANTICThis Red Seal program offers training in joining and severing metals in beams, girders, vessels, piping and other metal components. Some of the duties include, developing patterns in given layouts; blueprints and work orders; cleaning and checking for defWeldingNewfoundland
COLLEGE OF THE NORTH ATLANTICAuto Body and Collision Technician – COLLEGE OF THE NORTH ATLANTICThis Red Seal program is designed to assist you in developing sufficient basic skills and knowledge to enter the labor force as an apprentice mechanic in auto body and collision. Some of the duties include, repair and replace vehicle structures and body pCore TrainingNewfoundland
COLLEGE OF THE NORTH ATLANTICAutomotive Service Technician – COLLEGE OF THE NORTH ATLANTICYou will get training in adjusting, testing and repairing engines, steering systems, braking systems, drive trains, vehicle suspensions, electrical systems and air conditioning systems, and do wheel alignments.Core TrainingNewfoundland
COLLEGE OF NEW CALEDONIAApprentice Welding – COLLEGE OF NEW CALEDONIAThe Welding apprenticeship program will train you to become a skilled welder, leading towards Red Seal certification (after successful program and work based training hours completion). CNC offers all three levels of technical training.WeldingBritish Columbia
COLLEGE OF NEW CALEDONIAWelding Foundation Program – COLLEGE OF NEW CALEDONIAAs a graduate of the Welding Foundation program, you’ll be qualified for a variety of jobs in the construction and metal working industries. You’ll also be prepared to successfully complete employers’ skill assessments.WeldingBritish Columbia
COLLEGE OF NEW CALEDONIAMotor Vehicle Body Repairer – COLLEGE OF NEW CALEDONIAThis foundation program will provide entry level practical skills and academic knowledge to prepare you to begin your apprenticeship pathway as a Motor Vehicle Body Repairer. If you are mechanically inclined, a critical thinker, good at task planning andCore TrainingBritish Columbia
COLLEGE OF NEW CALEDONIAApprentice Motor Vehicle Body Repairer – COLLEGE OF NEW CALEDONIAApprentices must have their employer register them with Industry Training Authority (ITA) and fill out the apprenticeship application online. All apprenticeship training requires in-person shop sessions. All shop sessions will be provided with physical diApprenticeshipBritish Columbia
COLLEGE OF NEW CALEDONIAAutomotive Service Technician Diploma – COLLEGE OF NEW CALEDONIAAutomotive service technicians perform preventative maintenance, diagnose problems and repair vehicle systems including engines, vehicle management, hybrids, steering, braking, tires, wheels, drivetrains, suspensions, electrical, electronics, heating, venCore TrainingBritish Columbia
COLLEGE OF NEW CALEDONIAAutomotive Service Technician Foundation – COLLEGE OF NEW CALEDONIAAutomotive Service Technicians are essential to maintaining the health of your vehicle. They investigate, diagnose, and repair issues related to the mechanical systems in vehicles, often undertaking complex computer diagnostics to resolve issues.Core TrainingBritish Columbia
COLLEGE OF NEW CALEDONIAApprentice Automotive Service Technician – COLLEGE OF NEW CALEDONIAThe Automotive Service Technician apprenticeship program will train you to become a skilled automotive mechanic, leading towards Red Seal certification (after successful program and work based training hours completion). CNC offers all four levels of techApprenticeshipBritish Columbia
COLLEGE OF NEW CALEDONIAAutomotive Refinishing Prep Technician – COLLEGE OF NEW CALEDONIAYou will have practical, hands-on learning on real vehicles using traditional and state-of-the-art technology. You will also spend time in the classroom learning the theories and details that will set you apart from others and give you a strong foundationCore TrainingBritish Columbia
COLLEGE OF NEW CALEDONIAAutobody (Motor Vehicle Body Repair) – COLLEGE OF NEW CALEDONIAVehicle repair technicians review damage reports and hammer out dents, buckles and defects; remove damaged fenders, panels and grilles; straighten bent frames; and repair and replace exterior and interior components.Core TrainingBritish Columbia
COLLEGE OF NEW CALEDONIAAutomotive Service Technician Apprenticeship – COLLEGE OF NEW CALEDONIAFrom fender-benders to major bodywork, you will learn to fix brakes, repair electrical systems, understand steering systems, perform preventative maintenance and fulfil other industry needs.ApprenticeshipBritish Columbia
COLLEGE COMMUNAUTAIRE DU NB – CAMPUS DE BATHURSTWelding – COLLEGE COMMUNAUTAIRE DU NB – CAMPUS DE BATHURSTThis program prepares the student for a job in the field of welding. The student will be able to apply the various welding techniques used in industry: to oxy-fuel, to arc with coated electrode and to arc in inert atmosphere with fusible electrode. The stWeldingNew Brunswick
COLLEGE COMMUNAUTAIRE DU NB – CAMPUS DE BATHURSTAutomotive Mechanics – COLLEGE COMMUNAUTAIRE DU NB – CAMPUS DE BATHURSTThis program prepares the student for employment in the field of maintenance and repair of automobiles and vans. There, the student will be able to diagnose problems, check the equipment, understand the cause of a failure, carry out repairs to components,Repair & MaintenanceNew Brunswick
COLLEGE COMMUNAUTAIRE DU NB – CAMPUS DE BATHURSTDent Repair and Body Painting – COLLEGE COMMUNAUTAIRE DU NB – CAMPUS DE BATHURSTThis program prepares the student for a position in the repair, dent removal and painting of automobile and light truck bodies. There they will use hand and power tools to straighten, sand, polish, remove and replace body panels and frame parts. They willRepair and Paint/RefinishingNew Brunswick
COLLEGE BOREALWelding Techniques – COLLEGE BOREALThis program prepares the student to work in the steel manufacturing and welding industry, as well as in construction, mining, forestry, and specialized trades. Upon completion of the program, the student can obtain certificates from the Canadian WeldingWeldingOntario
COLLEGE BOREALMotive Power Technician – Truck & Coach – COLLEGE BOREALGain the necessary skills based on industry practices to perform truck and coach repair work for various companies while respecting Ontario codes and regulations. The program integrates repair techniques and skills based on concepts learned in the classroCore TrainingOntario
COAST MOUNTAIN COLLEGEWelding Foundation – COAST MOUNTAIN COLLEGEA welder is a person who has training in and is capable of welding ferrous and non-ferrous metals in all positions, on both plates and/or pipe, using various welding processes. Certified welders qualify for test with CSA, BCSA, and for ASME procedures inWeldingBritish Columbia
COAST MOUNTAIN COLLEGEAutomotive Service Technician Apprenticeship – COAST MOUNTAIN COLLEGEAutomotive Service Technicians repair, adjust and replace mechanical and electrical parts in automobiles and light trucks. They repair damaged components and perform preventative maintenance, inspect completed work and test that the vehicle’s performanceApprenticeshipBritish Columbia
COAST MOUNTAIN COLLEGEAutomotive Service Technician Foundation – COAST MOUNTAIN COLLEGEThis training gives students the technical skills and knowledge to repair, adjust and replace mechanical parts in automobiles and light trucks. Program covers all the theory and practical components necessary for the first-year Automotive Service TechniciCore TrainingBritish Columbia
CHIEF UNIVERSITY/CHIEF AUTOMOTIVE TECHNOLOGIESUnitized Body Analysis & Repair Planning – CHIEF UNIVERSITY/CHIEF AUTOMOTIVE TECHNOLOGIESThis interactive class is designed for entry-level and experienced structural repair technicians. Technicians will learn the fundamental principles of collision theory, measuring, analyzing, repair planning and setup for unibody vehicles to maximize bothStructural RepairIndiana
CHIEF UNIVERSITY/CHIEF AUTOMOTIVE TECHNOLOGIESFull Frame Analysis & Repair Planning – CHIEF UNIVERSITY/CHIEF AUTOMOTIVE TECHNOLOGIESThis class is designed for entry-level and experienced structural repair technicians. Technicians will learn the fundamental principles of collision theory, measuring, analyzing, repair planning and setup for full-frame vehicles to maximize both repair quStructural RepairIndiana
CHIEF UNIVERSITY/CHIEF AUTOMOTIVE TECHNOLOGIESDesign-Based Repair – CHIEF UNIVERSITY/CHIEF AUTOMOTIVE TECHNOLOGIESThis advanced course features instruction on the advanced steels that are being introduced in vehicles by manufacturers. The information in this course includes problems related to proper metal identification and identification of proper repair methods anStructural RepairIndiana
CHIEF UNIVERSITY/CHIEF AUTOMOTIVE TECHNOLOGIESComputerized Measuring Systems Training – CHIEF UNIVERSITY/CHIEF AUTOMOTIVE TECHNOLOGIESThis class trains technicians in the most efficient use of computerized measuring. Technicians learn to operate Chief,Äôs computerized measuring systems to identify structural misalignment and maximize both repair quality and profitability. Hands-on activStructural RepairIndiana
CHIEF UNIVERSITY/CHIEF AUTOMOTIVE TECHNOLOGIESADA Course (Aluminum Damage Analysis and Repair Technology) – CHIEF UNIVERSITY/CHIEF AUTOMOTIVE TECHNOLOGIESThis one-day interactive class is designed for entry-level or experienced appraisers and structural repair technicians. Students will learn the principles of aluminum forming methods, alloys, temper designations, damage analysis, repair processes, weldingAluminumIndiana
CHIEF UNIVERSITY/CHIEF AUTOMOTIVE TECHNOLOGIESHeavy Duty Truck Collision Repair – CHIEF UNIVERSITY/CHIEF AUTOMOTIVE TECHNOLOGIESIn this course, you will learn: how to perform a thorough visual inspection of structural damage; where and how damages exist based on collision dynamics and structural design; the measuring principles and techniques used with self-centering and electroniManagement & EstimatingIndiana
CHIEF UNIVERSITY/CHIEF AUTOMOTIVE TECHNOLOGIESStructural Damage Analysis – CHIEF UNIVERSITY/CHIEF AUTOMOTIVE TECHNOLOGIESThis comprehensive course features instruction on collision theory, structural damage analysis skills and correction procedures. It is designed for the body shop estimator or insurance appraiser. This interactive course covers: collision theory of unitizeManagement & EstimatingIndiana
CHIEF UNIVERSITY/CHIEF AUTOMOTIVE TECHNOLOGIESASA Course – Advanced Steering & Suspension Analysis – CHIEF UNIVERSITY/CHIEF AUTOMOTIVE TECHNOLOGIESThis advanced course features 16 hours of instruction on the analysis of vehicles with steering and suspension problems. The course covers: steering geometry angles and their relationship to vehicle handling; front suspension designs and checking for misaManagement & EstimatingIndiana
CHIEF UNIVERSITY/CHIEF AUTOMOTIVE TECHNOLOGIESAFA Course (Advanced Frame Analysis) Focused on Pickup and Sport Utility – CHIEF UNIVERSITY/CHIEF AUTOMOTIVE TECHNOLOGIESThis advanced course covers collision theory of body-on-frame vehicles, with a specific emphasis on pickup trucks and sport utility vehicles; visual inspection of the vehicle‚ lower and upper structures to determine types of misalignment; hands-on measuriManagement & EstimatingIndiana
CHC PAINT AND BODY SUPPLIESN/A – CHC PAINT AND BODY SUPPLIESI-CAR Approved MVP Business Development Series courses are grouped into the five functional areas of collision center business operations: Administration Courses, production courses, leadership courses, sales & marketing, and financial management. CoursesManagementN/A
CENTENNIAL COLLEGEAutomotive – Motive Power Technician (Optional Co-op) – CENTENNIAL COLLEGEWith an emphasis on motor vehicle technology, this program prepares you for work within the transportation industry. Through various theoretical and practical courses, you acquire trade-relevant skills and knowledge that help you undertake positions in aCore TrainingOntario
CENTENNIAL COLLEGEAutomotive Service Technician Toyota (MAP 32) – CENTENNIAL COLLEGEThe Automotive Service Technician Toyota (MAP 32) program has been designed for existing or new Toyota/Lexus dealer apprentices. During your time in the program, you’ll alternate between in-school lessons and apprenticeship work terms at your Toyota/LexusApprenticeshipOntario
CENTENNIAL COLLEGEAutomotive Service Technician Honda AHAP (MAP 32) – CENTENNIAL COLLEGEThe offering is for new or existing Acura or Honda dealer apprentices, and is specifically designed to give your career the turbocharge it needs. Not only will this program provide the educational component required for your apprenticeship, but it will alApprenticeshipOntario
CENTENNIAL COLLEGEAutomotive Service Technician General Motors of Canada ASEP (MAP 32) – CENTENNIAL COLLEGEDivided between in-class lessons and on-the-job experience, this transportation program will offer the best of both worlds as you’ll alternate between the College and your employer for a total of 64 weeks (32 weeks with each). A large portion of your in-cApprenticeshipOntario
CENTENNIAL COLLEGEAutomotive Service Technician Ford Asset (MAP 32) – CENTENNIAL COLLEGEThe focus of the Automotive Service Technician Ford Asset (MAP 32) program is on teaching you Ford’s latest technology, with specific emphasis on electronics and the diagnosing of vehicle-management systems. You will alternate between the College and yourApprenticeshipOntario
CENTENNIAL COLLEGEAutomotive Service Technician Co-op partnered with TADA and FCA – CENTENNIAL COLLEGEWhile the primary focus of the program is Automotive Diagnosis and Repair, other aspects of automotive dealership operations are included. As a student in this program, you will spend your first eight months in class learning your craft at our impressiveApprenticeshipOntario
CENTENNIAL COLLEGEAutomotive Service Technician – Apprenticeship Training – CENTENNIAL COLLEGEThe automotive service technician apprenticeship offers the general working knowledge of all of a vehicle’s systems. Among the systems covered in this program will be engines, electrical/electronics, fuels, transmissions, drivelines, steering, suspenApprenticeshipOntario
CENTENNIAL COLLEGEAuto Body Collision and Damage Repairer – CENTENNIAL COLLEGEThis program focuses on techniques and materials for all aspects of auto body repair. It covers components, frames, panels, grills, holes, dents and other surface repairs.ApprenticeshipOntario
CENTENNIAL COLLEGEAutomotive Service Technician Pre-Apprenticeship – CENTENNIAL COLLEGEThe Automotive Service Technician Pre-Apprenticeship is a tuition-free transportation program that’s funded by the Government of Ontario and designed as a transition step to finding an apprenticeship. Earn Level 1 automotive service technician training, rCore TrainingOntario
CENTENNIAL COLLEGEAutomotive Service Technician Canadian Tire (MAP 32) – CENTENNIAL COLLEGEFacilitated by the School of Transportation, the Canadian Tire Automotive Service Technician program combines in-depth classroom and hands-on lab training with a four-week, on-the-job work placement experience.Core TrainingOntario
CENTENNIAL COLLEGEAutomotive Service Technician – CENTENNIAL COLLEGEThe automotive service technician program offers students the general working knowledge of all a vehicle’s various systems.Core TrainingOntario
CENTENNIAL COLLEGEAuto Body Repair Techniques – CENTENNIAL COLLEGEThis offering is based on the Level 1 apprenticeship curriculum, with some valuable additions. In the autobody repair techniques courses, you acquire the theoretical knowledge and practical skills to ensure you have a competitive edge in the autobody repaCore TrainingOntario
CARSTARN/A – CARSTAROffering training and other support through the CARSTAR U learning institute, CARSTAR has many systems in place to help get your location open and turning a profit. With teams to support marketing, operations, insurance and fleet, CARSTAR provides a commuManagementn/a
CARLETON UNIVERSITYMechanical Engineering – CARLETON UNIVERSITYThis program emphasizes the development of analytical, computational and hands-on skills in design, dynamics, thermodynamics, heat transfer, fluid mechanics, solid mechanics, materials, control systems and robotics. Elective courses in energy conversion aEngineeringOntario
CAR-PART.COMCar-part.com – CAR-PART.COMCar-Part.com offers live training via phone and live chat, webinars, and tutorials to auto recyclers, repairers and insurers. Additionally, auto recyclers are offered round tables. In-person training remains on hold due to COVID-19.Recycling TrainingKentucky
Car-O-LinerCLEM-00002 Bench, Measuring Systems & Pulling System Training – Car-O-LinerDesigned for advanced technicians who have been working with Car-O-Liner equipment. This course meets the US I-CAR Structural ProLevel 2 course requirement equivalent for Introduction to Three-Dimensional Measuring – ST055E01.WeldingMichigan
Car-O-LinerCLEM-00007 Basic Electronic Measuring – Car-O-LinerEntry level technicians that are just starting to work with Car-O-Liner equipment. Typically, this training occurs within 90 days of installation; or for new employees needing training on the Car-O-Liner equipment. This course meets the US I-CAR StructuraWeldingMichigan
Car-O-LinerCLEM-00012 Basic Resistance Welder Installation – Car-O-LinerThis course is designed for the entry to advanced technician using Car-O-liner resistance spot welder. This course meets the US I-CAR Structural ProLevel 2 course requirement equivalent for Introduction to Squeeze-Type Resistance Spot Welding – ST010E01 oWeldingMichigan
Car-O-LinerCLEM-00008 Basic Frame Bench – Car-O-LinerDesigned for entry level technicians that are just starting to work with Car-O-Liner equipment. Typically, this training occurs within 90 days of installation; or for new employees needing training on the Car-O-Liner equipment. This course qualifies as anWeldingMichigan
Car-O-LinerCLEM-00009 Speed Frame Bench – Car-O-LinerDesigned for entry level technicians that are just starting to work with Car-O-Liner equipment. Typically, this training occurs within 90 days of installation; or for new employees needing training on the Car-O-Liner equipment. This course qualifies as anWeldingMichigan
Car-O-LinerCLEM-00013 – Car-O-LinerThis course is designed for the entry to advanced technician using the Car-O-liner CR200 Aluminum and Steel Dent Repair Station. This course qualifies as an Annual Training Alliance Course for I-CAR US.WeldingMichigan
Car-O-LinerMig Mag Welding – Car-O-LinerThis one-day training course is designed for the entry to advanced technician using Car-O-liner MIG/MAG welder. The safety overview will include information on personal protective equipment (PPE) and an in-depth overview of the welder specifications and hWeldingMichigan
CANADORE COLLEGEAutomotive Service Technician Apprenticeship – CANADORE COLLEGEGain the skills and training required to challenge the Certification of Qualification exam. This program is run in a day release format to allow the apprentice to continue to work in the trade while learning one day per week. This training is a stepping sApprenticeshipOntario
CANADORE COLLEGEMetal Fabricator Apprenticeship – CANADORE COLLEGEWelding, layout and fitting techniques used in the industry. This is a day release program. Students can work and earn an income while in class. Level 1 is common core class with the welder apprenticeship.WeldingOntario
CANADORE COLLEGEMechanical Technician – Welder-Fitter – CANADORE COLLEGELearn the specialized skills of the trade on industry-standard machines in our 425 sq. m lab. You will learn multiple welding processes, including shield metal arc welding (SMAW), flux cored arc welding (FCAW), gas metal arc and gas tungsten arc welding,WeldingOntario
CANADORE COLLEGEMotive Power Technician – CANADORE COLLEGELearn to operate, diagnose and service all types of vehicles, from standard automobiles to industrial heavy-duty equipment. Perform actual service procedures on a wide variety of components found in the powertrain of heavy vehicles, install and set up cluCore TrainingOntario
CANADIAN APPRENTICESHIP FORUMApprenticeship 101 – CANADIAN APPRENTICESHIP FORUMWhether you’re working in the trades or a budding apprentice looking for information, Apprenticeship 101 can provide you with the essential basics you need to know.ApprenticeshipOntario
CAMOSUN COLLEGEWelder Foundation – CAMOSUN COLLEGEThis full-time program conforms to industry standards, practices and procedures to prepare you for entry-level employment and to begin a welding apprenticeship. You’ll develop skills including Oxy-Fuel gas cutting, welding, brazing, material handling, andWeldingBritish Columbia
CAMOSUN COLLEGEAutomotive Service Technician Foundation – CAMOSUN COLLEGEThis course focuses on general automotive practices, fuel and electrical/electronic systems, engine performance and repair. Graduates should be employable within many areas of the automotive industry, including lube technician, tire repair techniciCore TrainingBritish Columbia
CAMBRIAN COLLEGEMotive Power Technician – Service And Management (VMTN) – CAMBRIAN COLLEGEGet hands-on training servicing gas-powered and hybrid vehicles and learn the ropes of shop management. You will learn to diagnose and repair complex wiring systems, understand serial data communications and perform quality repairs. Emissions systems, autCore TrainingOntario
CAMBRIAN COLLEGEWelding And Fabrication Technician (WFTN) – CAMBRIAN COLLEGEWorking in the college’s welding lab, you will take metal fabrication projects from the engineering drawing stage through cutting and forming processes to the welding and inspection phases. You will have unique opportunities to put your welding skills intWeldingOntario
BRITISH COLUMBIA INSTITUTE OF TECHNOLOGY, BURNABY CAMPUSMotor Vehicle Body Repair Technician – BRITISH COLUMBIA INSTITUTE OF TECHNOLOGY, BURNABY CAMPUSThe Motor Vehicle Body Repair Technician apprenticeship program generally takes four years to complete, including 6,750 workplace hours and 480 in-school hours. Level Two apprenticeship training (five weeks): welding, sheet metal repair, plastics and compApprenticeshipBritish Columbia
BRITISH COLUMBIA INSTITUTE OF TECHNOLOGY, BURNABY CAMPUSMotor Vehicle Body Repair Technician Foundation – BRITISH COLUMBIA INSTITUTE OF TECHNOLOGY, BURNABY CAMPUSThe program consists of 32 weeks of full-time studies that includes theory and related information, along with hands-on shop assignments and practice. This program provides Foundation, or Level 1, apprentice training. The Motor Vehicle Body Repair TechnicCore TrainingBritish Columbia
BRITISH COLUMBIA INSTITUTE OF TECHNOLOGY, BURNABY CAMPUSAutomotive Collision Estimator – BRITISH COLUMBIA INSTITUTE OF TECHNOLOGY, BURNABY CAMPUSThis course will prepare you to enter the field of collision estimation, focusing on customer service and communication skills. Autobody methodology, insurance regulations and estimation techniques will be covered, as well as an introduction to Mitchell aCore TrainingBritish Columbia
BRITISH COLUMBIA INSTITUTE OF TECHNOLOGY, BURNABY CAMPUSAutomotive Refinishing Technician Foundation – BRITISH COLUMBIA INSTITUTE OF TECHNOLOGY, BURNABY CAMPUSThis 26-week training will provide the theoretical understanding and practical skills needed to use a spray gun to apply both the primer and final coats of paint and maintain records of materials used in accordance with regulations. Upon successful compleCore TrainingBritish Columbia
BRITISH COLUMBIA INSTITUTE OF TECHNOLOGY, APPRENTICE SERVICESAutomotive Service Technician Apprenticeship – BRITISH COLUMBIA INSTITUTE OF TECHNOLOGY, APPRENTICE SERVICESThe classroom program will include courses in electrical systems, air conditioning systems, fuel systems, driveline, engine mechanical, powertrain, steering and suspension, brakes, options and accessories, computer operated/assisted systems, truck cApprenticeshipBritish Columbia
BETAGGlass Repair & Replacement – BETAGThis Glass Repair and Replacement course focuses on developing the knowledge and skills necessary to remove and replace glass properly and safely. It also includes modules to develop technicians’ awareness of the various ADAS systems that can be affectedNon-Structural RepairCalifornia
BETAGEstimator – Level 1 – BETAGThis estimator training program is relevant for estimators with some work experience. It is a technically focused program centered on four core modules: Customer First; Vehicle Structure; Damage Analysis; and Repair Methods. The knowledge and skills learnManagement & EstimatingCalifornia
BETAGPanel Repair Aluminum – Level 1 – BETAGRelevant to technicians of all experience levels, BETAG’s Aluminum Panel Repair program focuses on the core principles of straightening aluminum auto body panels, to a level of finish that requires minimal filler to complete a high-quality repair. These sAluminumCalifornia
BETAGPanel Repair Steel – Level 1 – BETAGThis Medium Panel Repair program focuses on the core principles of straightening steel auto body panels, to a level of finish that requires minimal filler to complete a high-quality repair. These skills can be applied across a wide range of simple and morNon-Structural RepairCalifornia
BETAGPlastic Repair – Level 1 – BETAGThis Plastic Repair program focuses on developing the knowledge and skills necessary to repair plastic panels and parts properly and safely. It also includes modules to develop technicians’ awareness of the various ADAS systems that can be affected and stNon-Structural RepairCalifornia
BETAGSmall Damage – Level 2 – BETAGThis Small Damage Level 2 course is designed to elevate the skill level of technicians to enable them to successfully complete paintless dent repairs of elastic and plastically deformed small damages. These skills can be applied across a wide range of panNon-Structural RepairCalifornia
BETAGSmall Damage – Level 1 – BETAGRelevant to technicians of all experience levels, BETAG’s Small Damage Repair program starts by focusing on the fundamentals of metal repair. These include identifying the complete damage area; understanding the characteristics of plastic and elastic defoNon-Structural RepairCalifornia
BASFAdvanced Production Management VPU001 – BASFThis training teaches you to understand the concept, importance and benefits of increasing throughput, cycle time. Practise new techniques of production management, including how to manage the repair and to understand the need to write a complete damage rPaint & RefinishingOntario
BASFEstimating for Profit VPU002 – BASFThis training teaches you to understand the critical importance of the estimator. Learn to sell first, estimate second. Generate a complete damage report. Effectively negotiate with insurers. Understand how to measure selling performance.Paint & RefinishingOntario
BASFGet The Keys! VPU038 – BASFThis training teaches you to learly identify what differentiates a shop from the competition and how to effectively communicate that to customers to close the sale. Better communicate with prospective and current customers by asking appropriate questionsPaint & RefinishingOntario
BASFDelivering Complete Customer Satisfaction VPU029 – BASFThis training teaches you to understand the importance of complete customer satisfaction. Implement a systematic approach to identifying and meeting customer needs during the five interactive opportunities that recur in every repair. Document each step ofPaint & RefinishingOntario
BASFMeasuring and Improving Performance VPU003 – BASFThis training teaches you to collect accurate and timely financial and non-financial data. Develop a working knowledge of the critical collision centre KPIs and what affects them and understand how to use KPIs to measure and improve collision centre perfoPaint & RefinishingOntario
BASFGlasurit 22/55/90 Certification Program – BASFThis training teaches you to inspect products properly and know where in the process to improve speed, accuracy and quality in shops.Paint & RefinishingOntario
BASFGlasurit Color Adjustment Techniques RFN202 – BASFA systematic mechanical approach to understand tinting and blending colours to achieve an undetectable repair.Paint & RefinishingOntario
BASFR-M Color Adjustment Techniques 1 RFN102 – BASFA systematic mechanical approach to understand tinting and blending colours to achieve an undetectable repair.Paint & RefinishingOntario
BASFR-M Diamont/ONYX Certification Program RFN101 – BASFThis training teaches you to know how to use product properly and where in the process in order to yield quality work that reduces comebacks and do-overs. Properly mix and apply R-M coatings to achieve durable, warrantable, and undetectable finishes.Paint & RefinishingOntario
BASFOrganizational Structure VPU015 – BASFThis training teaches you to understand the relationship between the repair process and structure. Implement changes to improve effectiveness and understand the advantages and disadvantages of each type of organizational structure.Paint & RefinishingOntario
BASFPaint Department Productivity VPU005 – BASFWith this training you can Increase collision centre output and capacity. Effectively use people, space, equipment and time. Maximize paint hours and number of vehicles through the paint department. Recognize the need to effectively sell paint labour in oPaint & RefinishingOntario
BASFPaint and Material Profitability VPU004 – BASFThis training teaches you to understand what affects paint and material profitability. How to accurately determine a collision centre’s actual profitability on paint and material and helps you to understand and track the paint department’s key performancePaint & RefinishingOntario
BASFR-M Recertification Class RFN300 – BASFA one-day overview of all recently released products that meet R-M and OEM warranty specifications. This training is mandatory every two years to renew warranty specifications.Paint & RefinishingOntario
BASFGlasurit Re-certification RFN400 – BASFA one-day overview of all recently released products that meet Glasurit and OEM warranty specifications. This training is mandatory every two years to renew warranty specifications.Paint & RefinishingOntario
BASFPreparation Process and Analysis RFN207 – BASFPreparation is the most important part of a quality repair. It provides longevity of the professional look of the vehicle. Learn substrate preparation procedures and the application of the undercoat system. Acquired knowledge will increase your shop produPaint & RefinishingOntario
AXALTA COATING SYSTEMS CANADA COMPANY311 – Standox® Coloristic 2—Color Matching Techniques – AXALTA COATING SYSTEMS CANADA COMPANYThis instructor-led Standox® course is designed to help participants understand how to correctly mix and analyze color. This includes color theory, the correct angles and lighting conditions and how to correctly shade a color that needs adjustment.Paint & RefinishingOntario
AXALTA COATING SYSTEMS CANADA COMPANY304 – Standox® Standoblue® Advanced 3-Stage Course – AXALTA COATING SYSTEMS CANADA COMPANYThis instructor-led Standox® course is designed to help the participant understand the 3-stage process as well as how to use it to make repairs.Paint & RefinishingOntario
AXALTA COATING SYSTEMS CANADA COMPANY303 – Standoblue® Micro-Repair Course – AXALTA COATING SYSTEMS CANADA COMPANYThis instructor-led hands-on course covers the basic techniques in repairing stone chip damage, very small blends and wheel repair. This non-warranted repair process enables collision repair facilities to offer customer pay options. Skills acquired in thiPaint & RefinishingOntario
AXALTA COATING SYSTEMS CANADA COMPANY302 – Standox® Advanced Matte Finishes – AXALTA COATING SYSTEMS CANADA COMPANYThis instructor-led Standox® course is a one-day course designed to develop the knowledge and skills of paint technicians when applying matte clears.Paint & RefinishingOntario
AXALTA COATING SYSTEMS CANADA COMPANY301 – Standox® Standoblue® Advanced Tri-Coat & Specialty Colors – AXALTA COATING SYSTEMS CANADA COMPANYThis instructor-led Standox® course is designed to help painters understand the 3-stage process, tinted mid-coats, specialty colors, as well as how to repair them.Paint & RefinishingOntario
AXALTA COATING SYSTEMS CANADA COMPANY211 – Standox® Coloristic 1—Electronic Color Tools – AXALTA COATING SYSTEMS CANADA COMPANYThis instructor-led Standox® course is designed to help painters understand electronic color tools such as the ColorNet® computer software and Acquire RX™ and Acquire Plus EFX™ spectrophotometer.Paint & RefinishingOntario
AXALTA COATING SYSTEMS CANADA COMPANY202 – Understanding Pre-Paint Productivity and Profit – AXALTA COATING SYSTEMS CANADA COMPANYThis instructor-led course covers the secrets to productivity and profitability, as it relates to the pre-paint process. This course is intended for anyone who is part of the pre-paint process.Paint & RefinishingOntario
AXALTA COATING SYSTEMS CANADA COMPANY201 – Standox® Standoblue® Painter Certification – AXALTA COATING SYSTEMS CANADA COMPANYThis instructor-led Standox® course is designed to help painters understand the products used in their shop, as well as the processes necessary to successfully and efficiently refinish any color.Paint & RefinishingOntario
AXALTA COATING SYSTEMS CANADA COMPANY101 – Standox® Standoblue® Field Certification – AXALTA COATING SYSTEMS CANADA COMPANYThis Standox® course is designed to help participants understand the products used in their shop, as well as the processes necessary to successfully and efficiently refinish any color.Paint & RefinishingOntario
AXALTA COATING SYSTEMS CANADA COMPANY311 – Spies Hecker® Color 2—Color Matching Techniques – AXALTA COATING SYSTEMS CANADA COMPANYThis instructor-led Spies Hecker® course is designed to help participants understand how to correctly mix and analyze color. This includes color theory, the correct angles and lighting conditions, and how to correctly shade a color that needs adjustment.Paint & RefinishingOntario
AXALTA COATING SYSTEMS CANADA COMPANY304 – Spies Hecker® Hi-TEC Advanced 3-Stage Course – AXALTA COATING SYSTEMS CANADA COMPANYThis instructor-led Spies Hecker® course is designed to help the participant understand the 3-stage process as well as how to use it to make repairs.Paint & RefinishingOntario
AXALTA COATING SYSTEMS CANADA COMPANY303 – Spies Hecker® Hi-TEC Micro-Repair Course – AXALTA COATING SYSTEMS CANADA COMPANYThis instructor-led hands-on course covers the basic techniques in repairing stone chip damage, very small blends and wheel repair. This non-warranted repair process enables collision repair facilities to offer customer pay options. Skills acquired in thiPaint & RefinishingOntario
AXALTA COATING SYSTEMS CANADA COMPANY302 – Spies Hecker® Advanced Matte Clearcoat – AXALTA COATING SYSTEMS CANADA COMPANYThis instructor-led Spies Hecker® course is a 1-day course designed to develop the knowledge and skills of paint technicians when applying matte clears.Paint & RefinishingOntario
AXALTA COATING SYSTEMS CANADA COMPANY301 – Spies Hecker® Permahyd® Hi-TEC Advanced 3-Stage & Specialty Colors – AXALTA COATING SYSTEMS CANADA COMPANYThis instructor-led Spies Hecker® course is designed to help painters understand the three-stage process, tinted mid-coats, specialty colors, as well as how to repair them.Paint & RefinishingOntario
AUTOMOTIVE TRAINING INSTITUTECollision Repair Master Class for Shop Success – AUTOMOTIVE TRAINING INSTITUTEThis class includes a live 3-hour instruction, one-on-one consultation before and after the event, and supporting documents. This virtual event is jam-packed with actionable tips on how to thrive during this COVID outbreak, negotiate with insurance companManagement & EstimatingMaryland
AUTOMOTIVE TRAINING INSTITUTEAuto Repair Master Class for Shop Success – AUTOMOTIVE TRAINING INSTITUTEThis class includes a live 3-hour instruction, one-on-one consultation before and after the event, and supporting documents. This virtual event is jam-packed with actionable tips on how to thrive during this COVID outbreak, maintaining car count and cashManagementMaryland
AUTOMOTIVE TRAINING CENTRERefinishing Prep and Auto Body Technician – AUTOMOTIVE TRAINING CENTREThis program provides students with hands-on training and up-to-date information for the occupations of an Auto Body Technician and Automotive Refinishing Prep Technician. The focus is on a strong foundation of the skills required to ensure the student’sCore TrainingBritish Columbia
AUTOMOTIVE TRAINING CENTREAutomotive Technology – AUTOMOTIVE TRAINING CENTREIn the ATC’s Automotive Technology Training program (approved as a vocational program under the Private Career Colleges Act, 2005), instructors provide students with the classroom and hands-on shop training needed to acquire an entry-level position and peCore TrainingBritish Columbia
AUTOMOTIVE TRAINING CENTREAutomotive Service Technician – AUTOMOTIVE TRAINING CENTREA combination of both classroom theory (40 percent) and hands-on training (60 percent), this program offers the auto mechanic student the experiences required for entry-level auto mechanic jobs. This auto mechanic pre-apprenticeship program prepares studeCore TrainingBritish Columbia
AUTOMOTIVE TRAINING CENTREAutomotive Service Advisor – AUTOMOTIVE TRAINING CENTREThe Automotive Service Advisor program combines the Automotive Service Consultant, Auto Body Collision Estimator and Parts & Warehousing programs to provide a complete automotive service education. It provides a wide-angle view of dealer/store operationsCore TrainingBritish Columbia
AUTOMOTIVE TRAINING CENTREAutomotive Detailing – AUTOMOTIVE TRAINING CENTREThis course covers the essentials of preparing a car for the showroom floor and offers hands-on skills in exterior and interior maintenance for used automobiles. Students will receive instruction on a wide variety of surfaces and materials. This course maCore TrainingBritish Columbia
AUTOMOTIVE TRAINING CENTREAutomotive Collision Estimator – AUTOMOTIVE TRAINING CENTREThis program covers how to inspect vehicles to determine the amount of structural, body, mechanical or interior damage is needed, by using mechanical testing devices, questioning customers and by visual inspection. Students will learn how to calculate cosCore TrainingBritish Columbia
Automotive Career Development CenterQualified Shop Program – Automotive Career Development CenterThis program is designed for shop owners and technicians to learn training techniques specific to electric and hybrid vehicles, get access to the right equipment, service information, and tools, as well as marketing and management advice.ManagementMassachusetts
Automotive Career Development CenterRecorded Webinars – Automotive Career Development CenterA wide variety of online classes are available on a range of topics. Discounts are available when registering for multiple webinars.VariousMassachusetts
Automotive Career Development CenterLive Webinars – Automotive Career Development CenterLive Webinars are held twice a day at 8:00am and 2:00pm EST. The webinars cover a wide range of topics and applications. Discounts are available for multiple bookings.VariousMassachusetts
Automotive Career Development CenterUp Your Voltage Class – Automotive Career Development CenterThis training will require you to spend a week studying, driving, testing, scanning, scoping, servicing, and taking various hybrid /EVs apart. ACDC has lots of parts to work with, scan tools, and scopes and so the class will be based mainly on today’s tecCore TrainingMassachusetts
Automotive Career Development CenterElectric Drive Class – Automotive Career Development CenterThis class is based on today’s technology and the many parts to work with, scan tools, and scopes. The 5 day course focuses on HEV, PHEV, and EV components, systems, operation, safety, service, equipment, maintenance, and more.Core TrainingMassachusetts
Automotive Career Development CenterAmped Up Class – Automotive Career Development CenterThis class is based on today’s technology and the many parts to work with, scan tools, and scopes. The 3 day course focuses on HEV, PHEV, and EV components, systems, operation, safety, service, equipment, maintenance, and more.Core TrainingMassachusetts
ASSINIBOINE COMMUNITY COLLEGEAutomotive Technician – ASSINIBOINE COMMUNITY COLLEGEGain essential skills for the automotive service industry while learning in a hands- on environment. The nine-month Automotive Technician certificate program focuses on the basics of shop skills, electrical, engines and powertrains, preparing students toCore TrainingManitoba
ASSINIBOINE COMMUNITY COLLEGEAutomotive Service Technician Apprenticeship – ASSINIBOINE COMMUNITY COLLEGELearn to service, repair and replace damaged or worn components for electrical and electronic controls, fuel systems, emission systems, steering and suspension systems, cooling and heating systems, transmissions, differentials, drivelines, axles and shiftApprenticeshipManitoba
ASSINIBOINE COMMUNITY COLLEGEWelding Pre-apprenticeship, tuition-free – ASSINIBOINE COMMUNITY COLLEGEThis tuition-free, pre-apprenticeship Welding program aims to encourage key groups including, but not limited to, women, Indigenous peoples, newcomers to Canada, persons with disabilities, and those currently underemployed, to explore a career in the skilWeldingManitoba
ASSINIBOINE COMMUNITY COLLEGEWelder Apprenticeship – ASSINIBOINE COMMUNITY COLLEGEA welder certified with this training has the knowledge, ability and skills required to lay out, cut, prepare, repair, install and join metals of various compositions using a variety of welding equipment.WeldingManitoba
ARA UNIVERSITYARA University – ARA UNIVERSITYARA University is an online training resource for the automotive recycling industry. ARAU courses are the choice of hundreds of U.S. and International automotive recycling businesses. The eLearning Center provides a web-based training portal with interacRecycling TrainingVirginia
ANEST IWATAN/A – ANEST IWATAAnest Iwata provides an online resources library for painters. It includes troubleshooting tips, technical guides and guided learning for Anest Iwata automotive refinishing products.Paint & RefinishingN/A
Altra ProductsAluminum Welding – Altra ProductsLearn how to use Car-O-Liner aluminum welding equipment through this two-day course.WeldingMichigan
Altra ProductsComputer measuring – Altra ProductsLearn how to use Car-O-Liner Computer measuring through this two-day course.Michigan
ALLY BUSINESS SOLUTIONSLeadership Development Cours – ALLY BUSINESS SOLUTIONSThe Ally leadership development course is a personalized, six-month program designed to unlock the full potential of both current and future leaders. Candidates work weekly, one-on-one and live online with their coach. The course offers: customized indiviManagementOntario
ALLDATAALLDATA TRAINING – ALLDATAALLDATA offers free webinars led by experts on new technologies, current industry trends and best practices for repair and collision professionals. ALLDATA also offers training videos, product experts available by phone and instructor-led webinars that alCore BasicsN/A
ALGONQUIN COLLEGEWelding And Fabrication Techniques – ALGONQUIN COLLEGEStudents learn key welding concepts, including reading and interpreting engineering drawings, metallurgy, joint and metal preparation. Students develop skills in oxy acetylene welding, shielded metal arc welding, gas metal arc welding, flux-core arc weldiWeldingOntario
ALGONQUIN COLLEGEAutomotive Service Technician (GM-ASEP) (Apprenticeship) – ALGONQUIN COLLEGEDesigned by General Motors (GM) to prepare for a career with GM dealerships. This training alternates between formal in-class training and hands-on work experience in a dealership. Apprentices learn about electrical systems, air conditioning systems, fuelApprenticeshipOntario
ALGONQUIN COLLEGEAutomotive Service Technician (Apprenticeship) – ALGONQUIN COLLEGEDivided into three levels (Beginner, Intermediate, Advanced), this training will require you to alternate between classwork for 8 weeks and perfecting skills by working in the field for 8-12 months. During each level, apprentices study topics such as workApprenticeshipOntario
ALGONQUIN COLLEGEAuto Body Repairer (Apprenticeship) – ALGONQUIN COLLEGESixty percent of class time is spent in theory and 40 percent in learning practical, hands-on skills. In the basic, intermediate, and advanced levels, apprentices learn the different types of body construction, repair techniques and refinishing proceduresApprenticeshipOntario
ALGONQUIN COLLEGEMotive Power Technician – ALGONQUIN COLLEGEThrough a series of classroom-based courses and extensive practical labs, you will acquire skills specific to becoming an Automotive Service Technician. Learn to maintain and repair electrical and mechanical systems within a vehicle, including chassis andCore TrainingOntario
ACCESS CAREER CENTREAutomobile Mechanics – ACCESS CAREER CENTRELearn to perform preventive and corrective mechanic work; inspect vehicles with the goal of finding the cause of operating problems; perform repairs, replace parts and make adjustments in different vehicle systems; procedure for installing accessories andCore TrainingQuebec
ACADEMY CANADAAuto Body and Collision Technician (Pre-Employment) – ACADEMY CANADAApprenticeship training for Auto Body and Collision Technicians who repair and restore damaged motor vehicle body parts and interior finishing; repaint body surfaces; and repair and/or replace automotive glass. This group also includes metal repairers whoApprenticeshipNewfoundland
ACADEMY CANADAAutomotive Service Technician (Pre-employment) – ACADEMY CANADAProvides students with skills that are needed to work as a first-year apprentice, including safety skills, engine systems, drivelines, electrical, HVAC, steering, braking systems, suspension, body components, trim, restraint systems and hybrid/ alternativApprenticeshipNewfoundland
3D CanadaProfessional Car Detail Training – 3D CanadaPerfect for anyone looking to up their game or learn proper techniques from scratch. If you want to start a detailing business the 4 day program can get you on the right path, or if you have the basics down and want to become a more advanced polisher, traInterior Clean upOntario
Play
Play
previous arrow
next arrow
Slider

Recent Posts

Our other sites